RGT Technology, LLC . . .
| Part Number | Manufacturer | Description | Brand | Price & Lead Time |
|---|---|---|---|---|
| 2900-018 | ALBER | Alber 2900-018 Cable - printer interface connector/ cable Simple Type: Cable | Request Quote | |
| 5524 | ALBER | Alber 5524 Accessory - prospective rubber housing Simple Type: Accessory | Request Quote | |
| 77130 | ALBER | Alber 77130 Accessory - hard plastic case Simple Type: Accessory | Request Quote | |
| BCT-2000 | ALBER | The BCT-2000 tests any size string up to 256 cells, performs constant current capacity and power capacity tests, supports UPS testing using AC load banks, and supports run-down testing using system load. Simple Type: CAPACITY TEST SYSTEMS | Request Quote | |
| BDS-256 | ALBER | BDS-256 Battery Monitoring and Diagnostic System The BDS-256 continuously monitors all critical battery parameters, automatically performs periodic resistance tests to verify the operating integrity of the connected battery, and greatly improves the reliability of your DC power system. Simple Type: CONTINUOUS BATTERY MONITORS | Request Quote | |
| BDS-40 | ALBER | BDS-40 Battery Monitoring and Diagnostic System The BDS-40, especially designed and optimized to monitor UPS batteries in cabinets, continuously monitors all critical battery parameters, automatically performs periodic resistance tests to verify the operating integrity of the connected battery, and greatly improves the reliability of your DC power system. Simple Type: CONTINUOUS BATTERY MONITORS | Request Quote | |
| Cellcorder® CLC-200 | ALBER | Cellcorder® CLC-200 Battery Internal Resistance Tester and Multimeter The Cellcorder takes float voltage readings and measures both internal cell resistance and intercell resistance. Simple Type: Portable Test Equipment | Request Quote | |
| Cellcorder® CRT-300 | ALBER | The Alber SCT-200 may be used while the battery being tested is on-line. The instrument performs a programmable, constant current or profile discharge test, then a programmable, constant voltage recharge. Custom software, automatic operation, and safety circuits allow the user to program the unit and start the test. No supervision of the test system is required. Simple Type: Portable Test Equipment | Request Quote | |
| CLC-100 | ALBER | Alber CLC-100 Albercorp CellCorder Battery Multimeter Simple Type: Multimeter Download the datasheet (PDF) | Request Quote | |
| CLC-200 | ALBER | Cell Resistance Tester; Measures cell voltage and internal battery resistance as well as intercell resistance. Simple Type: BATTERY TEST SYSTEM | Request Quote | |
| CRT-300 | ALBER | ALBER CRT-300 Test batteries from 0~16V. Cellcorder, Cell Resistance Tester; Measures cell voltage and internal battery resistance as well as intercell resistance. Simple Type: Battery Tester The CRT-300 Cellcorder battery cell voltage and resistance tester features a Smart Media memory card, infrared communication, graphical reflective LCD display, and newly designed cables and clamps. The Cellcorder reads single cells and multicell modules, and displays and records cell float voltage, internal cell resistance, and intercell connection resistance. A compatible hydrometer can transfer specific gravity and temperature data via the IR port. | Request Quote | |
| CRT-400 | ALBER | Alber CRT-400 Test Kit- CellCorder Resistance Battery Test Kit Simple Type: Test Kit The CRT-400, Alber's handheld Cellcorder utilizes the well-proven and patented DC resistance test to eliminate the guess work when trying to identify a failing battery. Download the datasheet (PDF) | Request Quote | |
| DMA35N | ALBER | Alber DMA35N Meter - The Alber DMA35N is a handheld, stand-alone digital density meter suitable for use in the most demanding industrial environments. Simple Type: Meter The Alber DMA35N is a handheld, stand-alone digital density meter suitable for use in the most demanding industrial environments. Simply press a lever and, within seconds, the temperature, density, specific gravity, or percent concentration of the sample is displayed. To save the data, simply press a button; up to 1024 data points may be stored in the instrument. Weighing only 10 ounces, the DMA35N digital hydrometer won’t tire you out, no matter how many samples must be measured. And the DMA35N delivers up to 90 hours of service on two alkaline 1.5 volt AAA batteries. Download the datasheet (PDF) | Request Quote | |
| DMA35N-CRT | ALBER | The DMA35N-CRT is a snap-on module used for data transfer to a PC or an Alber Cellcorder. It includes both a serial interface for a PC or the CLC-200 Cellcorder and an infrared interface for communication with the new CRT-300 Cellcorder. PC software is included with this model. Simple Type: Portable Test Equipment | Request Quote | |
| DMA35N-EXPCRT | ALBER | The Alber DMA35N is a handheld, stand-alone digital density meter suitable for use in the most demanding industrial environments. Simply press a lever and, within seconds, the temperature, density, specific gravity, or percent concentration of the sample is displayed. To save the data, simply press a button; up to 1024 data points may be stored in the instrument. Weighing only 10 ounces, the DMA35N digital hydrometer won’t tire you out, no matter how many samples must be measured. And the DMA35N delivers up to 90 hours of service on two alkaline 1.5 volt AAA batteries. The EXP specifications means Explosion Proof & the CRT is the interface that it comes with. Simple Type: Portable Test Equipment | Request Quote | |
| Micro-Ohmmeters | ALBER | Alber Micro-Ohmmeter Series, Low Resistance Testers. Simple Type: Micro-Ohmmeter Micro-ohmmeters are instruments specifically designed to eliminate the guesswork when determining electrical connection problems. Applications include measuring the resistance of switch and circuit breaker contacts; transformers and motors; aircraft, rail and pipe bonds; cable splices, welds and fuses; metal alloys, graphite electrodes, wire and cable. ALBER micro-ohmmeters use a technique known as four-wire measurement to test for very low resistances. This highly accurate yet simple method passes a known current through the unknown resistance being tested while measuring the voltage drop. Results are displayed by a digital voltmeter. What distinguishes one micro-ohmmeter from another is the amount of current used in the measurement, as well as the number of measuring ranges. ALBER instruments use higher average current across measuring ranges than any other manufacturer, allowing them to provide accurate, consistent readings even in a high noise environment. The internal power source that provides the constant DC measurement current is either a battery, AC powered supply, or a combination of both. Rating of an instrument is usually the highest current used on the lowest resistance range. Standard current ranges offered are 10, 25 and 100 Amps. Download the datasheet (PDF) | Request Quote | |
| MLT-12 | ALBER | MLT-12 Momentary Battery Load Tester This portable battery tester provides pass/fail status for 12 volt modules. It features 50 amp continuous load and complete rejection of AC ripple. Simple Type: Portable Test Equipment | Request Quote | |
| MPM-100 | ALBER | MPM-100 Battery Monitoring and Diagnostic System The MPM-100 multi-purpose monitor is a single module solution, containing data collection, controller, and resistance test circuitry for all applications of 140 volts or less. Simple Type: CONTINUOUS BATTERY MONITORS | Request Quote | |
| PSC-10A | ALBER | PSC-10A Programmable Smart Charger This charger provides 2 volt cells with up to 10 amps of charge current. Output voltage is 2.85VDC maximum. The PSC-10A features polarity protection, programmable equalization time, and programmable float charge time. Simple Type: Portable Test Equipment | Request Quote | |
| RM-650 | ALBER | RM-650 Recharge Module Reconnecting a discharged string back to the bus can be time consuming and expensive. And when done incorrectly, the huge in-rush of current can create dangerous and destructive arcs. The Alber RM-650 Recharge Module is the first device that lets you recharge a discharged string using the existing on-line charger. The RM-650 incorporates a current limiting circuit that you can operate in manual or automatic mode to facilitate the recharging of a discharged battery. The unit applies a resistance across a disconnect switch and limits current to 700 amps. Typical maximum current is 650 amps. When the battery voltage is close to the bus voltage (within approx. 0.5 volts), the string can be safely connected back to the bus. Simple Type: CAPACITY TEST SYSTEMS | Request Quote | |
| RT-10 | ALBER | Alber RT-10 Micro-Ohmmeter. Low Resistance Tester. Battery Powered. 4-1/2 Digit Display. Five Ranges 0-200.00 Ohms. 1 Microhm Resolution. Light Weight Protected Against Active Circuits Simple Type: Micro-Ohmmeter The RT-10 is a lightweight, general purpose instrument with very high resolution. Designed to operate well in high 50/60Hz noise environments, this unit is well suited for testing in high voltage switchyards. Special safety circuits protect against active circuits up to 500VDC, making it ideal for battery test crews. Download the datasheet (PDF) | Request Quote | |
| RT3-100 | ALBER | Alber RT3-100 Micro-Ohmmeter. Low Resistance Tester. Battery Powered. 3-1/2 Digit Display. Two Ranges 0-20.00 Milliohms. 1 Microhm Resolution Battery Saver Circuits Simple Type: Micro-Ohmmeter The RT3-100 is designed to meet NEMA and ANSI standards for power equipment testing, the RT3-100 is the most accurate and repeatable reading instrument on the market today. Due to limited range, it is primarily used for switchgear, power circuit breakers, welds, high current joints or bonds and intercell connections on batteries. Download the datasheet (PDF) | Request Quote | |
| RT3-100L | ALBER | Alber RT3-100L Micro-Ohmmeter. Low Resistance Tester. AC Powered. 3-1/2 Digit Display. Two Ranges 0-20.00 Milliohms. 1 Microhm Resolution Protected Against Active Circuits Simple Type: Micro-Ohmmeter The RT3-100L is the lightest 100 Amp continuous rated current instrument on the market. Similar in performance to the RT3-100, this unit offers the additional features of AC power and special built in safety circuits. This instrument can also be used continuously and is ideal for testing battery intercell connections. Download the datasheet (PDF) | Request Quote | |
| RT4-25 | ALBER | Alber RT4-25 Micro-Ohmmeter. Low Resistance Tester. AC Powered. 3-1/2 Digit Display. Five Ranges 0-20.00 Ohms. 1 Microhm Resolution Simple Type: Micro-Ohmmeter The RT4-25 is the ideal unit for power transformer testing. High test current is used on all ranges, providing a stable reading in a short period of time. Wide range of measurement and high test current make the RT4-25 a good general purpose instrument in situations where battery operation is not a requirement. Download the datasheet (PDF) | Request Quote | |
| RT5-10 | ALBER | Alber RT5-10 Micro-Ohmmeter. Low Resistance Tester. AC and/or Battery Powered. 3-1/2 Digit Display. Five Ranges 0-20.00 Ohms. 1 Microhm Resolution Simple Type: Micro-Ohmmeter The RT5-10 offers both an AC powered supply and a battery source capable of delivering 10 Amps. This dual power supply, coupled with a wide measuring range, makes this instrument the most versatile. Instrument applications range from battery intercells to power circuit breakers to power transformers. Download the datasheet (PDF) | Request Quote | |
| SCT-1200 | ALBER | The SCT test system can discharge and charge one cell at a time. The test sequence consists of discharging the cell to a selected end voltage at a programmed load current, then charging to a selected charge voltage at a programmed current limit for a time determined by the user Weighing only 10 ounces, the DMA35N digital hydrometer won’t tire you out, no matter how many samples must be measured. And the DMA35N delivers up to 90 hours of service on two alkaline 1.5 volt AAA batteries. Simple Type: Portable Test Equipment | Request Quote | |
| SCT-200 | ALBER | SCT-200 Single Cell Test and Charge System Testing a single cell at a time is practical when a suspect cell has been identified by either voltage, specific gravity or internal resistance measurement. The single cell test approach avoids the over-testing of remaining cells and is often used in the telephone and nuclear industries. Many users identify suspect cells with an internal measurement device such as the Cellcorder, then test single cell capacity using an SCT-200 single cell discharge unit. The Alber SCT-200 may be used while the battery being tested is on-line. The instrument performs a programmable, constant current or profile discharge test, then a programmable, constant voltage recharge. Custom software, automatic operation, and safety circuits allow the user to program the unit and start the test. No supervision of the test system is required. The SCT-200 comes with all required equipment, including the discharge/charge unit, a color laptop computer, load cables, and SCT-200 Windows-based software. System Description The discharge/charge module consists of data acquisition circuits for reading voltages and currents; two separate 300 amp resistive load banks that may be connected independently to two cells, or together as a single 600 amp load bank; a 1.80 to 2.60 volt, 0 to 120 amp programmable charger; communication circuitry for interfacing via RS-232 to a computer; and safety circuitry to prevent damage to the battery under test. Optional Packag Simple Type: CAPACITY TEST SYSTEMS | Request Quote |