Filter by Category
Unavailable
RGT Technology, LLC . . .
Part Number | Manufacturer | Description | Brand | Price & Lead Time |
---|---|---|---|---|
RM-650 | ALBER | RM-650 Recharge Module Reconnecting a discharged string back to the bus can be time consuming and expensive. And when done incorrectly, the huge in-rush of current can create dangerous and destructive arcs. The Alber RM-650 Recharge Module is the first device that lets you recharge a discharged string using the existing on-line charger. The RM-650 incorporates a current limiting circuit that you can operate in manual or automatic mode to facilitate the recharging of a discharged battery. The unit applies a resistance across a disconnect switch and limits current to 700 amps. Typical maximum current is 650 amps. When the battery voltage is close to the bus voltage (within approx. 0.5 volts), the string can be safely connected back to the bus. Simple Type: CAPACITY TEST SYSTEMS | Request Quote | |
RT-10 | ALBER | Alber RT-10 Micro-Ohmmeter. Low Resistance Tester. Battery Powered. 4-1/2 Digit Display. Five Ranges 0-200.00 Ohms. 1 Microhm Resolution. Light Weight Protected Against Active Circuits Simple Type: Micro-Ohmmeter The RT-10 is a lightweight, general purpose instrument with very high resolution. Designed to operate well in high 50/60Hz noise environments, this unit is well suited for testing in high voltage switchyards. Special safety circuits protect against active circuits up to 500VDC, making it ideal for battery test crews. Download the datasheet (PDF) | Request Quote | |
RT3-100 | ALBER | Alber RT3-100 Micro-Ohmmeter. Low Resistance Tester. Battery Powered. 3-1/2 Digit Display. Two Ranges 0-20.00 Milliohms. 1 Microhm Resolution Battery Saver Circuits Simple Type: Micro-Ohmmeter The RT3-100 is designed to meet NEMA and ANSI standards for power equipment testing, the RT3-100 is the most accurate and repeatable reading instrument on the market today. Due to limited range, it is primarily used for switchgear, power circuit breakers, welds, high current joints or bonds and intercell connections on batteries. Download the datasheet (PDF) | Request Quote | |
RT3-100L | ALBER | Alber RT3-100L Micro-Ohmmeter. Low Resistance Tester. AC Powered. 3-1/2 Digit Display. Two Ranges 0-20.00 Milliohms. 1 Microhm Resolution Protected Against Active Circuits Simple Type: Micro-Ohmmeter The RT3-100L is the lightest 100 Amp continuous rated current instrument on the market. Similar in performance to the RT3-100, this unit offers the additional features of AC power and special built in safety circuits. This instrument can also be used continuously and is ideal for testing battery intercell connections. Download the datasheet (PDF) | Request Quote | |
RT4-25 | ALBER | Alber RT4-25 Micro-Ohmmeter. Low Resistance Tester. AC Powered. 3-1/2 Digit Display. Five Ranges 0-20.00 Ohms. 1 Microhm Resolution Simple Type: Micro-Ohmmeter The RT4-25 is the ideal unit for power transformer testing. High test current is used on all ranges, providing a stable reading in a short period of time. Wide range of measurement and high test current make the RT4-25 a good general purpose instrument in situations where battery operation is not a requirement. Download the datasheet (PDF) | Request Quote | |
RT5-10 | ALBER | Alber RT5-10 Micro-Ohmmeter. Low Resistance Tester. AC and/or Battery Powered. 3-1/2 Digit Display. Five Ranges 0-20.00 Ohms. 1 Microhm Resolution Simple Type: Micro-Ohmmeter The RT5-10 offers both an AC powered supply and a battery source capable of delivering 10 Amps. This dual power supply, coupled with a wide measuring range, makes this instrument the most versatile. Instrument applications range from battery intercells to power circuit breakers to power transformers. Download the datasheet (PDF) | Request Quote |