SCT-200

ALBER

SCT-200 Single Cell Test and Charge System Testing a single cell at a time is practical when a suspect cell has been identified by either voltage, specific gravity or internal resistance measurement. The single cell test approach avoids the over-testing of remaining cells and is often used in the telephone and nuclear industries. Many users identify suspect cells with an internal measurement device such as the Cellcorder, then test single cell capacity using an SCT-200 single cell discharge unit. The Alber SCT-200 may be used while the battery being tested is on-line. The instrument performs a programmable, constant current or profile discharge test, then a programmable, constant voltage recharge. Custom software, automatic operation, and safety circuits allow the user to program the unit and start the test. No supervision of the test system is required. The SCT-200 comes with all required equipment, including the discharge/charge unit, a color laptop computer, load cables, and SCT-200 Windows-based software. System Description The discharge/charge module consists of data acquisition circuits for reading voltages and currents; two separate 300 amp resistive load banks that may be connected independently to two cells, or together as a single 600 amp load bank; a 1.80 to 2.60 volt, 0 to 120 amp programmable charger; communication circuitry for interfacing via RS-232 to a computer; and safety circuitry to prevent damage to the battery under test. Optional Packag Simple Type: CAPACITY TEST SYSTEMS

RT4-25

ALBER

Alber RT4-25 Micro-Ohmmeter. Low Resistance Tester. AC Powered. 3-1/2 Digit Display. Five Ranges 0-20.00 Ohms. 1 Microhm Resolution Simple Type: Micro-Ohmmeter The RT4-25 is the ideal unit for power transformer testing. High test current is used on all ranges, providing a stable reading in a short period of time. Wide range of measurement and high test current make the RT4-25 a good general purpose instrument in situations where battery operation is not a requirement. Download the datasheet (PDF)

RT3-100L

ALBER

Alber RT3-100L Micro-Ohmmeter. Low Resistance Tester. AC Powered. 3-1/2 Digit Display. Two Ranges 0-20.00 Milliohms. 1 Microhm Resolution Protected Against Active Circuits Simple Type: Micro-Ohmmeter The RT3-100L is the lightest 100 Amp continuous rated current instrument on the market. Similar in performance to the RT3-100, this unit offers the additional features of AC power and special built in safety circuits. This instrument can also be used continuously and is ideal for testing battery intercell connections. Download the datasheet (PDF)

RT3-100

ALBER

Alber RT3-100 Micro-Ohmmeter. Low Resistance Tester. Battery Powered. 3-1/2 Digit Display. Two Ranges 0-20.00 Milliohms. 1 Microhm Resolution Battery Saver Circuits Simple Type: Micro-Ohmmeter The RT3-100 is designed to meet NEMA and ANSI standards for power equipment testing, the RT3-100 is the most accurate and repeatable reading instrument on the market today. Due to limited range, it is primarily used for switchgear, power circuit breakers, welds, high current joints or bonds and intercell connections on batteries. Download the datasheet (PDF)

RT-10

ALBER

Alber RT-10 Micro-Ohmmeter. Low Resistance Tester. Battery Powered. 4-1/2 Digit Display. Five Ranges 0-200.00 Ohms. 1 Microhm Resolution. Light Weight Protected Against Active Circuits Simple Type: Micro-Ohmmeter The RT-10 is a lightweight, general purpose instrument with very high resolution. Designed to operate well in high 50/60Hz noise environments, this unit is well suited for testing in high voltage switchyards. Special safety circuits protect against active circuits up to 500VDC, making it ideal for battery test crews. Download the datasheet (PDF)