RGT Technology, LLC . . .

Filter by Category
Filter by Manufacturer
Unavailable
Part Number Manufacturer Description Brand Price & Lead Time
400-0255-000B WINSYSTEMS 48 channel universal I/O module with 8-bit PC/104 interface Simple Type: PC/104 AND PC/104-PLUS I/O MODULES Download the datasheet (PDF) Request Quote
ADP-SPEAKER WINSYSTEMS WinSystems ADP-SPEAKER Power Speaker Adapter Simple Type: Adapter Request Quote
CBL-115-4 WINSYSTEMS WinSystems CBL-115-4 4 ft. Ribbon to Opto Module Racks Simple Type: Interface Cable Request Quote
CBL-129-4 WINSYSTEMS WinSystems CBL-129-4 4 ft. Ribbon Cable, 50-pin Both Ends Simple Type: Interface Cable Request Quote
CBL-173-1 WINSYSTEMS WinSystems CBL-173-1 20-pin Ribbon to Two 9-pin Male D Connector Adapter Cable Simple Type: Adapter Cable Request Quote
CBL-174-1 WINSYSTEMS WinSystems CBL-174-1 Power Cable | for SBC (Unterminated) Simple Type: Power Cable Request Quote
CBL-225-1 WINSYSTEMS WinSystems CBL-225-1 PS/2 Mouse Adapter Cable Simple Type: PS/2 Mouse Adapter Cable Request Quote
CBL-247-1 WINSYSTEMS WinSystems CBL-247-1 Multi-I/O Adapter Cable Simple Type: Multi-I/O Cable Request Quote
CBL-249-1 WINSYSTEMS Winsystems CBL-249-1 4-pin USB Adapter Cable Simple Type: USB Adapter Cable Request Quote
CK-75176-2 WINSYSTEMS WinSystems CK-75176-2 RS-422/485 Chip Kit | for 1 Channel Simple Type: RS-422/485 Chip Kit Request Quote
FD3-144 WINSYSTEMS Winsystems FD3-144 3.5" Floppy on STD Bus card Simple Type: CPU Board The FD3-720 and FD3-144 are floppy disk drives modules containing 3.5 inch, double sided, micro-floppy drives mounted directly on an STD Bus card. This configuration allows a floppy drive to be easily and conveniently mounted in a STD Bus card cage. Download the datasheet (PDF) Request Quote
FLASH-MD2000 WINSYSTEMS WinSystems DOC2000 Flash Memory (8 - 288MB available, contact the factory) Simple Type: Accessory Request Quote
G400-0350-000B WINSYSTEMS PC/104-Plus 10/100 Ethernet module Simple Type: PC/104 AND PC/104-PLUS I/O MODULES Request Quote
HDAT-6G WINSYSTEMS Winsystems HDAT-6G 6GB hard drive on STD Bus card Simple Type: Accessory Request Quote
LPM-MDVGA-1M WINSYSTEMS Wynsystems LPM-MDVGA-1M CMOS STD Bus SVGA video controller Simple Type: Display Board The MCM-MDVGA is a versatile Multi-Display VGA controller that supports a wide variety of flat panel LCD and CRT displays on the STD Bus. This module can display the same data on both a flat panel and on a VGA CRT simultaneously. Download the datasheet (PDF) Request Quote
LPM-TX WINSYSTEMS Pentium CMOS STD Bus SBC Simple Type: CPU Board The MCM-TX is a STD Bus and the LPM-TX is a CMOS STD Bus high-performance, cost-effective, single board computer for computational-demanding applications. It is configured with a 166MHz or 266MHz Pentium CPU, two serial COM channels, and the standard AT peripheral feature set all on a single board. It supports expansion options with the STD Bus, PC/104 or PC/104-Plus bus and USB support for maximum design flexibility and reliability. Download the datasheet (PDF) Request Quote
MCM-102 WINSYSTEMS Winsystems MCM-102 Legacy 8-Bit CPU Board Simple Type: CPU Board Request Quote
MCM-33.6 WINSYSTEMS Wynsystems MCM-33.6 Fax/Modem Card Simple Type: Fax Board WinSystems’ STD Bus FAX/Modem cards are designed to directly connect to dial-up telephone lines. They support data rates up to 33600 bps with effective data modem throughput up to 115200 bps with MNP error correction and compression. The modem supports Fax Group 3 Send and Receive rates up to 14400 bps and supports T.30 protocol. The modems are fully compatible with the industry standard AT Command Set, providing access to a vast range of existing PC communication software. These boards offer a direct migration path for higher performance and lower costs from WinSystems’ MCM-2401/2496/ 9696/1414 Fax/Modem boards. Download the datasheet (PDF) Request Quote
MCM-6117 WINSYSTEMS WinSystems 386SX CPU Board | Single Board Computer (SBC) | with PC/104 Expansion Simple Type: CPU Board The MCM-6117 is a 386SX-compatible STD Bus SBC that provides a wide variety of I/O functions on a single card. The I/O complement includes 4 serial COM channels, 48 digital I/O lines, as well as the standard AT-peripherals of keyboard controller, real time clock, line printer port, plus IDE and floppy disk controllers It can replace both 386SX and V53-based STD Bus SBCs from WinSystems (MCM-SBC53) plus Ziatech's V53/V40(ZT8901, ZT8801, & ZT8802) and Pro-Log’s 7871. The MCM prefix on the MCM-6117 card designates a standard STD Bus board. The LPM prefix designates a CMOS STD Bus board. A MCM/LPM prefix indicates the card has the same features and functionality and is avail-able in both CMOS and regular NMOS/TTL logic. The differences between these two are the power requirements and operational temperature range. Download the datasheet (PDF) Request Quote
MCM-7418 WINSYSTEMS Win Systems MCM-7418 Sensor Module. 8-Channel Sensor Interface Simple Type: Sensing Module The MCM-7418 board is a complete 8/16 channel analog subsystem designed to offer a simple and inexpensive way to acquire high precision sensor data for any STD based system. It is optimized for temperature and low level signal measurements and includes signal filtering, sensor excitation and linearization on all channels. The onboard CPU performs all data acquisition control and preprocesses the data, thus reducing the software overhead by the STD Bus host CPU. Download the datasheet (PDF) Request Quote
MCM-7815 WINSYSTEMS Winsystems MCM-7815 Legacy 8-Bit CPU Board Simple Type: CPU Board The LPM/MCM-7815 is 8085A based STD BUS compatible board that has four byte-wide sockets that can be populated with either 2K X 8, 4K X 8, or 8K X 8 RAM or EPROMs. The LPM/MCM-7815 is plug compatible to the PRO-LOG 7815, and can also emulate the PRO-LOG 7801 and 7805 memory maps. In addition, the LPM-MCM-7815 supports a power-on reset with Vcc sensing to prevent processor lock-up, DMA to onboard memory, and 5 volt operation. Note: The LPM-7815 uses the 80C85. Download the datasheet (PDF) Request Quote
MCM-AD12 WINSYSTEMS Win Systems MCM-A/D12 Converter Board. 12-bit Analog Input Board Simple Type: Converter Board The MCM-A/D12 board provides 8 differential or 16 single-ended, 12-bit analog input channels with a throughput of up to 13,333 channels per second. User programmable gains from 1 to 1000 allow effective input ranges from 10 millivolts to 10 volts. Installation of an optional DC/DC converter makes the board require +5 volts only. The card contains a multiplexer, a pin programmable gain instrumentation amplifier, and a sample-hold circuit. The card accepts up to either 16 single-ended or 8 differential inputs. The card contains an Analog Devices ADC-80, 12-bit A/D converter. Coding can be straight binary, offset binary or 2’s complements. Download the datasheet (PDF) Request Quote
MCM-AIO WINSYSTEMS 12-Bit, Analog I/O Simple Type: I/O Module Download the datasheet (PDF) Request Quote
MCM-COM4A WINSYSTEMS Win Systems MCM-COM4A I/O Card. STD Bus Quad Serial I/O Card Simple Type: I/O Expansion The MCM-COM4A is a 4 channel serial 8250 compatible STD Bus board based on the Startech 16C554. It is ideally suited for applications that require exact PC compatible hard ware to the register level. Each channel is individually configurable for RS-232, RS-422, or RS-485 modes. Versatile interrupt routing allows for front plane or back plane interrupts as well as shared interrupts. An interrupt status register allows easy identification of the interrupt source. Three I/O mapping options allow for a total of up to 10 COM ports in a PC style system. The Startech 16C554 has a soft ware programmable transmit and receive FIFO of up to 16 bytes in depth. Download the datasheet (PDF) Request Quote
MCM-CPU2A WINSYSTEMS WINSystems MCM-CPU2A CPU Board Simple Type: CPU Board Request Quote
MCM-CTC WINSYSTEMS Winsystems MCM-CTC Flexible Counter/Timer Module Simple Type: Timer Module The LPM/MCM-CTC is designed to solve the common timing problems in industrial systems design. Nine independent 16-bit channels are capable of frequency/event counting from DC to 8 MHz, pulse marker or square wave generation, time interval measurements and one-shot simulation. Eight channels have a buffered Clock,Gate, and Output available at the top of the card. Jumper headers provide source selection and cascading to yield maximum configuration flexibility. Download the datasheet (PDF) Request Quote
MCM-DA12 WINSYSTEMS Winsystems MCM-D/A12 Analog Output Card with Octal 12-Bit DAC Simple Type: Analog Output Card The LPM/MCM-D/A12 is an STD Bus compatible, eight channel 12 bit digital to analog convertor board. Each channel can be configured for either a unipolar or a bipolar output with one of four output ranges: 0-5V, 0-10V, -/+5V, or +/-10V. The LPM/MCM-D/A12 takes 16 I/O ports if I/O mapped or 16 memory locations if memory mapped, and can be located on a 16 I/O port boundary, i.e., 00,10,20,...F0, if I/O mapped or 4k memory boundary if memory mapped. The LPM/MCM-D/A12 can be controlled by /IOEXP or /MEMEX. Download the datasheet (PDF) Request Quote
MCM-DX5 WINSYSTEMS WinSystems MCM-DX5 STD BUS 5x86 SBC with PC/104 Expansion Simple Type: CPU Board Request Quote
MCM-IO144 WINSYSTEMS WinSystems MCM-IO144 144-line STD Bus I/O Card Simple Type: STD Bus I/O Card The LPM/MCM-IO144/96/48 is a very versatile group of STD Bus cards providing up to 144 lines of digital I/O. Each line can be individually configured for input, out-put or output with read back. The major feature of this card is its ability to monitor both rising and falling digital edge transitions, latch them and then signal the host processor that a change of input status has occurred. Download the datasheet (PDF) Request Quote
MCM-MDVGA-1M WINSYSTEMS Winsystems MCM-MDVGA-1M STD Bus SVGA video controller Simple Type: CPU Board The MCM-MDVGA is a versatile Multi-Display VGA controller that supports a wide variety of flat panel LCD and CRT displays on the STD Bus. This module can display the same data on both a flat panel and on a VGA CRT simultaneously. Download the datasheet (PDF) Request Quote