RGT Technology, LLC . . .

Filter by Category
Filter by Manufacturer
Unavailable
Part Number Manufacturer Description Brand Price & Lead Time
Model 2509E >> SENSORAY NEMA-4 Enclosure Description This aluminum enclosure protects 2519’s in harsh environments. The cover seals the unit with a continuous D-ring seal. Three hard rubber feedthroughs seal signal and power cables. The enclosure is supplied with a 35 mm DIN rail for attaching most Sensoray products having a DIN suffix. The units four mounting holes are outside the area protected by the D-ring seal. Simple Type: BUS-TO-BUS ADAPTERS Request Quote
Model 2518DIN SENSORAY 24 V, 100 Watt Power Supply Sensoray’s Models 2518DIN and 2519DIN are the lowest cost-per-channel interfaces for strain gauges, temperature sensors, voltage or 4-20 mA to any computer with an Ethernet port. They feature 16-bit resolution from either eight or sixteen differential input channels, each individually programmable for a different sensor type. Analog-to-digital conversion is performed in under 22 milliseconds per channel for each block of eight channels. Model 2519DIN has two A/D converters. 8 channels with DIN hardware Simple Type: BUS-TO-BUS ADAPTERS Request Quote
Model 2519DIN SENSORAY 24 V, 100 Watt Power Supply Sensoray’s Models 2518DIN and 2519DIN are the lowest cost-per-channel interfaces for strain gauges, temperature sensors, voltage or 4-20 mA to any computer with an Ethernet port. They feature 16-bit resolution from either eight or sixteen differential input channels, each individually programmable for a different sensor type. Analog-to-digital conversion is performed in under 22 milliseconds per channel for each block of eight channels. Model 2519DIN has two A/D converters. 16 channels with DIN hardware Simple Type: BUS-TO-BUS ADAPTERS Request Quote
Model 2608-4 SENSORAY Analog I/O via Ethernet This member of the 2600 series of smart I/O modules connects to an Ethernet via a 2601 communication module. It reads sixteen analog input voltages, including thermocouples, and has up to eight 15-bit D/A’s. The 2608’s microcontroller provides I/O services to the remote 2601 client via a category-3 cable. The cable supplies isolated serial communication and power to the 2608’s microcontroller. 16 A/D inputs with 4 D/A outputs Simple Type: BUS-TO-BUS ADAPTERS Request Quote
Model 2608-8 SENSORAY Analog I/O via Ethernet This member of the 2600 series of smart I/O modules connects to an Ethernet via a 2601 communication module. It reads sixteen analog input voltages, including thermocouples, and has up to eight 15-bit D/A’s. The 2608’s microcontroller provides I/O services to the remote 2601 client via a category-3 cable. The cable supplies isolated serial communication and power to the 2608’s microcontroller. 16 A/D inputs with 8 D/A outputs Simple Type: BUS-TO-BUS ADAPTERS Request Quote
Model 2610 SENSORAY Analog I/O via Ethernet This member of the 2600 series of smart I/O modules connects to an Ethernet via a 2601 communication module. It reads sixteen analog input voltages, including thermocouples, and has up to eight 15-bit D/A’s. The 2608’s microcontroller provides I/O services to the remote 2601 client via a category-3 cable. The cable supplies isolated serial communication and power to the 2608’s microcontroller. Digital I/O Simple Type: BUS-TO-BUS ADAPTERS Request Quote
Model 2620 SENSORAY Analog I/O via Ethernet This member of the 2600 series of smart I/O modules connects to an Ethernet via a 2601 communication module. It reads sixteen analog input voltages, including thermocouples, and has up to eight 15-bit D/A’s. The 2608’s microcontroller provides I/O services to the remote 2601 client via a category-3 cable. The cable supplies isolated serial communication and power to the 2608’s microcontroller. 32-bit encoder/counter interface Simple Type: BUS-TO-BUS ADAPTERS Request Quote
Model 2650 SENSORAY Analog I/O via Ethernet This member of the 2600 series of smart I/O modules connects to an Ethernet via a 2601 communication module. It reads sixteen analog input voltages, including thermocouples, and has up to eight 15-bit D/A’s. The 2608’s microcontroller provides I/O services to the remote 2601 client via a category-3 cable. The cable supplies isolated serial communication and power to the 2608’s microcontroller. Relay output Simple Type: BUS-TO-BUS ADAPTERS Request Quote
Model 327 SENSORAY Model 327 and 328 allow operating a PCI board from a PC/104+ card stack. They have the unique feature of allowing the selection of important PC/104+ signals using jumper plugs. Hence, the PCI board is not forced to use hardwired settings. Simple Type: BUS-TO-BUS ADAPTERS Request Quote
Model 328 SENSORAY Model 327 and 328 allow operating a PCI board from a PC/104 card stack. They have the unique feature of allowing the selection of important PC/104 signals using jumper plugs. Hence, the PCI board is not forced to use hardwired settings. Simple Type: BUS-TO-BUS ADAPTERS Request Quote
Model 340 SENSORAY Three PC/104+ peripheral interfaces are built into model 340: USB, Ethernet, and CardBus/PCMCIA. All three use the PC/104+ bus. The PC/104 connector is for passing through the ISA bus PCMCIA interrupt signals. The 340 requires a CPU that has a PC/104+ bus. Individual peripheral device(s) can be disabled, so as to free slot(s) and INTx(s) from the PC/104+ bus. Simple Type: BUS-TO-BUS ADAPTERS Request Quote
Model 422 SENSORAY STD to ISA Bus Adapter The 422 is a bus-to-bus adapter that extends the ISA bus of a PC to a card rack of STD bus I/O boards. It has three parts: an ISA board, and STD board, and a set of flat cables to connect the two boards. The 422 makes the STD board appear as additional ISA boards in a PC. Simple Type: BUS-TO-BUS ADAPTERS Request Quote
Model 623 SENSORAY PC/104+ to PCI Adapter Description Model 623 allows testing PC/104+ boards using an inexpensive desktop PC. The 623 offers significant time savings during product development and production testing by allowing PC/104+ boards to be hot-swapped within a desktop PC. There is no need for an expensive PC/104+ enclosure and processor to test PC/104+ boards. Simple Type: BUS-TO-BUS ADAPTERS Request Quote
Model 627 SENSORAY Compact PCI to PCI Adapter Model 627 allows testing CompactPCI boards using an inexpensive desktop PC. The 627 offers significant time savings during product development and production testing by allowing CPCI boards to be hot-swapped within a desktop PC. There is no need for an expensive CompactPCI enclosure and processor to test CPCI boards. Simple Type: BUS-TO-BUS ADAPTERS Request Quote