Filter by Category
Unavailable
RGT Technology, LLC . . .
| Part Number | Manufacturer | Description | Brand | Price & Lead Time |
|---|---|---|---|---|
| AMC-ADIO24 | ESD | ESD AMC-ADIO24 I/O Module - The eight over voltage protected analog inputs connect to eight 16-bit A/D converters with a sampling rate of up to 200 kHz each. Simple Type: I/O Module The AMC-ADIO24 is equipped with a Spartan FPGA that manages the I/O data exchange in cooperation with the PCIe bridge. FIFOs for input and output direction and DMA to the PCIe host CPU’s memory minimizes undesired latency during PCIe read cycles at higher data rates. This module reduces the read cycles of the PCIe CPU to setup and diagnosis tasks. esd electronics designed each of the 24 TTL-level I/Os for configuration as input or output, high side driver, low side driver or both (sink/source), and the I/O port’s state reads back in any configuration via a comparator with hysteresis. Download the datasheet (PDF) | Request Quote | |
| AMC-ADIO-Adapter | ESD | ESD AMC-ADIO-Adapter I/O Module - HF ferrites in the signal lines improve the EMC properties of the AMC-ADIO-Adapter. The Mini COMBICON connector is pluggable to allow easy removing of the cable assemblies. Simple Type: I/O Module Eight signal lines plus Ground and Shield are routed via the har-link cable to the Mini COMBICON connector at the AMC-ADIO-Adapter. One Shield clamp is available for two signal lines. This ensures optimum shielding of the cable assembly. When mounted on the rail, the AMC-ADIO-Adapter shield potential automatically connects with the DIN-EN rail via a spring cage contact. If connected to one of the analog input connectors at the AMC-ADIO24, it makes four differential analog I/O signals plus Shield and Ground available. Connected to the analog output connector two analog outputs each as differential and single ended plus Shield are available. If you connect the module to one of the digital I/O connectors, you have eight digital I/O-signals plus Shield and Ground available. 4 SYNC ports plus Shield become available when the module connects to the SYNC-connector. Download the datasheet (PDF) | Request Quote | |
| AMC-CAN4 | ESD | ESD AMC-CAN4 Expansion Module - Cost effective: 4 channels onboard, Wide software support: drivers for Windows, Linux, QNX and other operating systems Simple Type: Expansion Module The AMC-CAN4 features four CAN High-Speed interfaces according to ISO 11898-2. The CAN interfaces are electrically isolated against the controller potential and against each other. CAN status is displayed by two LEDs for each CAN channel placed at the RJ45 connectors. The four independent CAN nets according to ISO 11898-1 are driven by the esd Advanced CAN Core (esdACC) CAN controller implemented in the Xilinx Spartan 3e FPGA. Controlled by the FPGA the AMC-CAN4 supports PCI bus mastering as an initiator, meaning that it is capable of initiating write cycles to the host CPU’s RAM independent of the CPU or the system DMA controller. This results in a reduction of overall latency on servicing I/O transactions in particular at higher Download the datasheet (PDF) | Request Quote |