RGT Technology, LLC . . .

PRODUCTS-A

Details

Part Number AMC-ADIO-Adapter
Manufacturer ESD
Category PRODUCTS-A
Price Request Quote
Lead Time Request Quote

Description

ESD AMC-ADIO-Adapter I/O Module - HF ferrites in the signal lines improve the EMC properties of the AMC-ADIO-Adapter. The Mini COMBICON connector is pluggable to allow easy removing of the cable assemblies. Simple Type: I/O Module Eight signal lines plus Ground and Shield are routed via the har-link cable to the Mini COMBICON connector at the AMC-ADIO-Adapter. One Shield clamp is available for two signal lines. This ensures optimum shielding of the cable assembly. When mounted on the rail, the AMC-ADIO-Adapter shield potential automatically connects with the DIN-EN rail via a spring cage contact. If connected to one of the analog input connectors at the AMC-ADIO24, it makes four differential analog I/O signals plus Shield and Ground available. Connected to the analog output connector two analog outputs each as differential and single ended plus Shield are available. If you connect the module to one of the digital I/O connectors, you have eight digital I/O-signals plus Shield and Ground available. 4 SYNC ports plus Shield become available when the module connects to the SYNC-connector. Download the datasheet (PDF)

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Related Products

ESD
ESD VME-ISER12 CPU Board - Intelligent interface board, with 12 serial channels on-board, 10 RS-232 interfaces, Functions and connections compatible to VME-ISER8 Simple Type: CPU Board The VME-ISER12 is an intelligent VMEbus interface w/ 12 serial process interfaces, and an additional RS-232 interface for connecting a terminal for service & programming. The serial controller SAB 82538 controls 8 serial interfaces, and the CPU 68360 controls 4 as well as the terminal interface via the SCC. Opto-couplers and DC/DC converters electrically isolate the interfaces & VMEbus potentials. Piggybacks locally realize the physical interfaces RS-232, RS-422, RS-485, & TTY-passive. The standard option has RS-232 drivers in sockets connecting via the VMEbus connector P2. The board is double Europe format with 4 TE (1 slot) width. The VMEbus connector P2 has 9 serial channels available. If needed, an additional channel connects via a front panel 9-pin post connector. A second DSUB-connector in the front panel is for the terminal interface (RS-232). The TTL-signals of the serial channels connect to two 50-pin post connectors. Download the datasheet (PDF)
ESD
ESD VME-PMC-CADDY-3.3P1 I/O Controller - 3.3V power supply directly connected to VMEbus 3.3V, not generated from 5V supply, extended temperature range on request Simple Type: I/O Controller The VMEbus unit PMC-CADDY is a VME64 base unit that can carry up to two PMC modules of normal size or one module of double size. For the VMEbus connection, the VME-PCI Bridge UNIVERSE CA91C142 by Tundra With an internal clock rate of 33 MHz is used. The CA91C142 interface can operate either as either slave or as Master on the VMEbus. If the board operates as master, it supports a 4-level arbiter. The PMC-CADDY operates with a data width of up to 32 bits and with 32 address signals on the VMEbus. You can apply the VMEbus interrupt to any of the seven interrupt-request lines. The board connects to the VMEbus by two 160-pin VG-connectors according to IEC603-xx on VME64 extensions. A red LED shows an active VMEbus-interrupt request in the front panel and a yellow LED shows a VMEbus access onto the board. Draft standard IEEE P1386/Draft 2.0 is the standard used for both PMC plug-in units' design except for the standard I/O pin routing. This design makes it possible to insert any PMC modules on the market. In addition to the connectors for the PMC address/ data and control signals, every plug-in unit of the PMC-CADDY has an I/O-connector that applies the I/O signals of the PMC modules to VMEbus connector P2. Two different P2 pin assignments are available: In the standard configuration, each P2-pin connects to one I/O-pin of the PMC modules (acc. to PMC-Update of FORCE ™, Table 1, Author: Wayne Fischer, Director of Strategic Programs CMC/PMC Working Groups Chair, 22.10.96). In the option -32P, the pin assignment is acc. to IEEE P1386/Draft 2.0, Table 6-3. This pin assignment offers to connect the two PMC-modules via P2, because several PMC-I/O-signals short at P2. Download the datasheet (PDF)
ESD
ESD VME-PMC-CADDY I/O Controller - VMEbus base board for two single PMC modules, P2-pin assignment acc. to PMC-Update from 22.10.96 (no interconnection between PMC-modules) Simple Type: I/O Controller The VMEbus unit PMC-CADDY is a VME64 base unit that can carry up to two PMC modules of normal size or one module of double size. For the VMEbus connection, the VME-PCI Bridge UNIVERSE CA91C142 by Tundra With an internal clock rate of 33 MHz is used. The CA91C142 interface can operate either as either slave or as Master on the VMEbus. If the board operates as master, it supports a 4-level arbiter. The PMC-CADDY operates with a data width of up to 32 bits and with 32 address signals on the VMEbus. You can apply the VMEbus interrupt to any of the seven interrupt-request lines. The board connects to the VMEbus by two 160-pin VG-connectors according to IEC603-xx on VME64 extensions. A red LED shows an active VMEbus-interrupt request in the front panel and a yellow LED shows a VMEbus access onto the board. Draft standard IEEE P1386/Draft 2.0 is the standard used for both PMC plug-in units' design except for the standard I/O pin routing. This design makes it possible to insert any PMC modules on the market. In addition to the connectors for the PMC address/ data and control signals, every plug-in unit of the PMC-CADDY has an I/O-connector that applies the I/O signals of the PMC modules to VMEbus connector P2. Two different P2 pin assignments are available: In the standard configuration, each P2-pin connects to one I/O-pin of the PMC modules (acc. to PMC-Update of FORCE ™, Table 1, Author: Wayne Fischer, Director of Strategic Programs CMC/PMC Working Groups Chair, 22.10.96). In the option -32P, the pin assignment is acc. to IEEE P1386/Draft 2.0, Table 6-3. This pin assignment offers to connect the two PMC-modules via P2, because several PMC-I/O-signals short at P2. Download the datasheet (PDF)
ESD
ESD VME-AIO16 CPU Board - CPU 68340, 25 MHz, 256 kbytes SRAM, 16 A/D channels (16 Bit), UIN = ±10 V, 4 D/A channels (16 Bit)Max. sample rate 45 kHz (only one channel used) Simple Type: CPU Board VME-AIO16 is an intelligent VMEbus board, containing 6 or 16 analog differential inputs and is ideally suited for fast and flexible data acquisition. It includes all necessary components on a VMEbus 6U board and needs one slot. The AIO16 contains a local MC 68340 CPU at 25 MHz for the execution of complex data acquisition algorithms. The CPU section of the AIO16 contains 256 kbytes of SRAM, EPROM and two RS-232 interfaces. Configuration parameters may be stored in an EEPROM. AIO16 contains 256 kbytes of shared SRAM, as well, to form the interface between local CPU and VMEbus. Designed for use of A/D converters with 16 bits resolution, the AIO16 can also be equipped with 12 bits resolution converters. The input voltage range with standard components is ±10 V. By varying the resistance values, other voltage ranges as well as current measurement (±20 mA) are possible. The A/D converters synchronize via an external trigger signal or via software. The included software allows you to obtain the following sampling rates: the maximum sampling rate from trigger signal to reception of the A/D-data in the SRAM is 33 kHz when sampling all 16 channels synchronously. If sampling only 8 channels synchronously, the maximum sampling rate is 40 kHz, for just one channel it is 45 kHz. In addition to the analog inputs, the AIO16 board contains 4 bipolar ±10 V D/A converter outputs with a resolution of 16 bits. These D/A converters allow internal calibration and offset adjustment of the input amplifiers. Connect each D/A converter to one of four A/D inputs via a multiplexer for this result. Of course, the user can also use these D/A converter outputs directly as process outputs. Download the datasheet (PDF)
ESD
ESD PMC-DVI I/O Controller - Graphics adapter board, DVI-I (digital video interface) connector including RGB-analog Simple Type: I/O Controller The PMC-DVI is a graphics board in ‘single’ PCI mezzanine card size with the powerful graphics controller 69030 offering display modes from 640x480 (true color) at 85 Hz up to 1600x1200 (16 bit colors) at 60 Hz. The DVI-I-interface design controls CRT-monitors by analog video signals as well as TFT-monitors by digital video signals. The board is equipped with a Mini-DSUB9-connector as PS2- interface. With an adapter, you can connect a PS2-keyboard and a PS2-mouse to this port simultaneously. Graphics drivers are available for VxWorks, RTOS/UH, Linux, QNX, Windows 98/NT2000, and other drivers upon request. Download the datasheet (PDF)

Specifications

Not available

Datasheet

Not available

Do you need an AMC-ADIO-Adapter? We can help you find it at a competitive price!