MCV1

EXEMYS

Converter of RS232 to RS485/RS422 for long distance communications and electrically noisy enviroments This converter has been design to communicate serially two or more equipments located one of another at long distances. It is good for industrial communication were there are electrical noisy enviroments thanks to their differential characteristic of the norm RS485/ RS422, their practical removable terminals and to their DIN rail assembly. Simple Type: Other Products

KIBe-1083-E

EXEMYS

KIBe-E is a device capable of featuring events and alerts notifications by sending and receiving e-mails, without the need for a PC. You can connect a switch, sensor or alarm to your KIBe-E and quickly receive an e-mail notice of any unexpected situation occurring within the system / machine / device you are monitoring. Because of its bi-directionality, KIBe-E can receive incoming e-mail messages and actively operate by enabling or disabling an output, such as a relay or any other device. It is very easy to install and configure; it allows you to send up to 128 e-mail messages through an Ethernet network connected to the Internet through a Cable Modem, ADSL, wireless or telephone connection. All e-mail messages sent through KIBe-E can be configured according to the notice to be given. ETHERNET 10 BaseT SERIAL PORTS RS232 1 RS485 --- RS422 --- DIGITAL INPUTS 8 OUTPUTS 3 Simple Type: INTERNET BASED SUPERVISION

IDx

EXEMYS

The IDx detects metallic masses measuring the inductance of a loop. This loop is part of an oscillating circuit that generates a magnetic field. When a vehicle passes over the loop the oscillator’s frequency changes. The IDx’s microprocessor detects these changes and, depending on its configuration, generates the corresponding output. Simple Type: Other Products

EGW1-224C-IA-MB

EXEMYS

This is a device used to connect any Modbus-enabled industrial equipment to an Ethernet network. It was designed for industrial applications where all equipment involved uses Modbus TCP, Modbus ASCII or Modbus RTU communications. EGW1 -MB can connect PLCs, drives, temperature controllers, bar-code readers, vision systems, and any other type of serial communication industrial equipment. ETHERNET 10 BaseT SERIAL PORTS RS232 2 RS485 2 RS422 --- DIGITAL INPUTS --- OUTPUTS --- CONFIG. 4 Simple Type: Protocol Converters

EGW1-2044-IA-MB-DF1

EXEMYS

SGW1-MB-DF1 shortens the gap between your preexistent Modbus ASCII/RTU application and any device with DF1 (Allen Bradley ® ) conectivity. SGW1-MB-DF1 is a Modbus ASCII/RTU to DF1 Serial Gateway. It is designed to gain access to any PLC with DF1 connectivity through any Modbus ASCII/RTU device or application. Protocol conversion is based on easy-to-fill translation tables. Map your DF1 Input, Output, Integer, Bit and Status Registers into Discrete Inputs, Coils, Input Registers and Holding Registers in Modbus address. SERIAL PORT RS232 2 DIGITAL INPUTS 4 OUTPUTS 4 CONFIG. --- Simple Type: Protocol Converters