RME1-AI-100-00-80-IA3-V100

EXEMYS

Acquired information can be read through Ethernet in four different ways. With RME1-AI you can aquire analog values in 4-20 mA, 0-10 Volts or 0-10 Volts format in a an accurate and unexpensive way throug Ethernet in four different ways (Modbus TCP, Web Page (HTTP), SNMP, CSV, XML). INPUTS 8 PROTOCOLS SERIAL PORTS 1 RS232 (*Configuration Serial Port.) INPUT TYPE 0-100V. Simple Type: Analog Modules

KIBe-1083-E

EXEMYS

KIBe-E is a device capable of featuring events and alerts notifications by sending and receiving e-mails, without the need for a PC. You can connect a switch, sensor or alarm to your KIBe-E and quickly receive an e-mail notice of any unexpected situation occurring within the system / machine / device you are monitoring. Because of its bi-directionality, KIBe-E can receive incoming e-mail messages and actively operate by enabling or disabling an output, such as a relay or any other device. It is very easy to install and configure; it allows you to send up to 128 e-mail messages through an Ethernet network connected to the Internet through a Cable Modem, ADSL, wireless or telephone connection. All e-mail messages sent through KIBe-E can be configured according to the notice to be given. ETHERNET 10 BaseT SERIAL PORTS RS232 1 RS485 --- RS422 --- DIGITAL INPUTS 8 OUTPUTS 3 Simple Type: INTERNET BASED SUPERVISION

IDx

EXEMYS

The IDx detects metallic masses measuring the inductance of a loop. This loop is part of an oscillating circuit that generates a magnetic field. When a vehicle passes over the loop the oscillator’s frequency changes. The IDx’s microprocessor detects these changes and, depending on its configuration, generates the corresponding output. Simple Type: Other Products

EGW1-224C-IA-MB

EXEMYS

This is a device used to connect any Modbus-enabled industrial equipment to an Ethernet network. It was designed for industrial applications where all equipment involved uses Modbus TCP, Modbus ASCII or Modbus RTU communications. EGW1 -MB can connect PLCs, drives, temperature controllers, bar-code readers, vision systems, and any other type of serial communication industrial equipment. ETHERNET 10 BaseT SERIAL PORTS RS232 2 RS485 2 RS422 --- DIGITAL INPUTS --- OUTPUTS --- CONFIG. 4 Simple Type: Protocol Converters

EGW1-2044-IA-MB-DF1

EXEMYS

SGW1-MB-DF1 shortens the gap between your preexistent Modbus ASCII/RTU application and any device with DF1 (Allen Bradley ® ) conectivity. SGW1-MB-DF1 is a Modbus ASCII/RTU to DF1 Serial Gateway. It is designed to gain access to any PLC with DF1 connectivity through any Modbus ASCII/RTU device or application. Protocol conversion is based on easy-to-fill translation tables. Map your DF1 Input, Output, Integer, Bit and Status Registers into Discrete Inputs, Coils, Input Registers and Holding Registers in Modbus address. SERIAL PORT RS232 2 DIGITAL INPUTS 4 OUTPUTS 4 CONFIG. --- Simple Type: Protocol Converters