RGT Technology, LLC . . .
Part Number | VME-PMC-CADDY2-CC |
---|---|
Manufacturer | ESD |
Category | PRODUCTS-V |
Price | Request Quote |
Lead Time | Request Quote |
ESD VME-PMC-CADDY/2-CC I/O Controller - VMEbus base board for two single PMC modules, P2-pin assignment acc. to IEEE Std P1386-2001, Table 8 (interconnection between 16 pins of the PMC-modules), no XMC, 3.3 V supply for PMC fed from VMEbus, extended temperature range Simple Type: I/O Controller The VMEbus unit VME-PMC-CADDY/2 is a VME64-base board that can carry up to two PMC modules of normal size. For the VMEbus connection, esd electronics uses the VME-PCI Bridge Tsi148 by Tundrap. The Tsi148 design allows the board to operate either as slave or as master on the VMEbus. Operating as a master, it supports a 4-level arbiter. The VMEbus interrupt can be applied to any of the seven interrupt-request lines. Two 160-pin VG-connectors (complementary to DIN41612) connect the board to the VMEbus for VME64 systems. LEDs in the front panel indicate an active VMEbus-interrupt request and a VMEbus access onto the board. The two PMC slots, designed according to the standard IEEE Std 1386-2001 (except the standard I/O pin routing)), make it possible to insert all PMC modules using 3.3 V signaling. In addition to the connectors for the PMC address/data and control signals, every slot of the VME-PMC-CADDY/2 has an I/O-connector that applies the I/O signals of the PMC modules to VMEbus connector P2. Two different P2 pin assignments are available: In the standard configuration, each P2-pin connects to one I/O-pin of the PMC modules acc. to VITA 35 (P4V2-64ac, P4V0-64). In the option ‘-32P’ the pin assignment is acc. to IEEE Std 1386-2001, Table 8. This pin assignment offers the connection of the two PMC-modules via P2. Download the datasheet (PDF)
Do you need an VME-PMC-CADDY2-CC? We can help you find it at a competitive price!