V104-512-16-PBF

TRI-M

Tri-M V104 with +5V & +12V outputs Simple Type: Power Supply

V104-5-16-PBF

TRI-M

Tri-M V104 with +5V output only Simple Type: Power Supply

V104

TRI-M

Tri-M V104 PC/104 Vehicle Power Supply Simple Type: Power Supply The V104 multiple ou tput DC to DC 25 watt converter is a vers atile, “bullet-proof” unit that can be supplied with as a +5V, outputs only or can include features such as Power Management, Universal Battery Charger, AC Bus termination, +12V output, -5V output, -12V output and custom output voltages from –42V to +42V. The V104, desi gned for embedded PC/104 co mputer systems, has a wide input range of 8 to 30V (>6:1) and is ideal for battery or unr egulated input applications or low voltage AC inputs. The V104 is specifically designed for vehicular applications. It has heavy-duty transient suppressors (5000W) that clamp the input voltage to safe levels, while maintaining normal power operation. Battery, DC and AC input configurations from 8 to 30V are al l handled by the V104 automatically. The V104 is a “simple switcher” based design that provides outstanding line and load regulation with efficiencies up to 80 percent. Organic Semi conductor capacitors provide filteri ng that reduces ripple noises below 30mV. The low noise design makes the V104 ideal for applications wherever EMI or RFI must be minimized. The +5VDC and +12VDC outputs are controlled by a constant off-time current-mode architecture regulator, which provides excellent line and load transient response. The +12VDC boost regulator uses the +5VDC as input power and therefore can operate without dropout from 8 to 30V input and supply 1A. A “plug-in” Universal Battery Charger (UBC104) is available for the V104 to charge Lead-Acid, NiCd and NiMh batteries. Charge currents can be up to 1.5A and battery charging voltages from 8 to 30V. The Power Management controller (PM104) allows timed on/off control of the V104, bus interrupts on impending power failure, current limit setting and intelligent charge termination for the UBC104. The V104 is provided in a PC/104 form factor comp liant size, which includes the 8bit and 16bit PC/104 expansion bus header. All generated voltages are provided to thei r related power supply pins on the PC/104 expansion bus and ar e all also available for off- board use through a screw terminal block. PC/104 AC bus termination is optionally available on the V104, which provides the cleanest possible signals on the PC/104 bus. The V104 can be configured to meet almost any power supply need for embedded PC/104 applications, whether that be a simple +5V application, providing power for back lighted LCD panels or a full UPS (uninterruptible power supply configuration). Download the datasheet (PDF)

HE104-512-N-PBF

TRI-M

Tri-M HE104-512-N-PBF power supply PC/104, In 6-40VDC, Out 50 Watt, +5V@10A, +12V@2A, (-40 to +85°C), No Bus Simple Type: Power Supply Download the datasheet (PDF)

HE104-512-16-PBF

TRI-M

Tri-M HE104-512-16-PBF power supply PC/104, In 6-40VDC, Out 50 Watt, +5V@10A, +12V@2A, (-40 to +85°C), ISA Bus Simple Type: Power Supply Download the datasheet (PDF)