RGT Technology, LLC . . .

Filter by Category
Unavailable
Filter by Manufacturer
Unavailable
Part Number Manufacturer Description Brand Price & Lead Time
SGW1-2100-IA-MB-HL EXEMYS SGW1-MB-HL converts an OMRON PLC (Hostlink Protocol) into a Modbus ASCII/RTU Slave easily. Using SGW1-MB-HL you can connect an OMRON PLC to a Modbus Network. Protocol conversion is based on easy-to-fill translation tables. EG: You can read OMRON registers DM0100 to DM0199 throug Modbus registers 40100 to 40199. SERIAL PORTS RS232 2 RS232 1 Hostlink port can be configured as RS232 or RS422. Simple Type: Protocol Converters Request Quote
SGW1-3100-ST-MMP EXEMYS Lets you connect up to 3 Modbus ASCII/RTU masters to your Modbus ASCII/RTU slaves transparently. If you have to connect Modbus slaves to more than one master, SGW1-ST-MMP is the right choice for you. SGW1-ST-MMP buffers the master´s polls giving them priorities, depending which of them came first, and then sends them to the slaves. Each serial port can be configured with different baud rates, parities and Modbus protocols (ASCII or RTU). So it is also possible to use SGW1-ST-MMP as a converter. SERIAL PORTS MASTERS 3 RS232 Up to 3 Masters SLAVES 1 RS485 Up to 32 Slaves Simple Type: Protocol Converters Request Quote
SGW1-4000-ST-MMP EXEMYS Lets you connect up to 3 Modbus ASCII/RTU masters to your Modbus ASCII/RTU slaves transparently. If you have to connect Modbus slaves to more than one master, SGW1-ST-MMP is the right choice for you. SGW1-ST-MMP buffers the master´s polls giving them priorities, depending which of them came first, and then sends them to the slaves. Each serial port can be configured with different baud rates, parities and Modbus protocols (ASCII or RTU). So it is also possible to use SGW1-ST-MMP as a converter. SERIAL PORTS MASTERS 3 RS232 Up to 3 Masters SLAVES 1 RS485 Up to 1 Slaves Simple Type: Protocol Converters Request Quote
SSE232 EXEMYS Ethernet communications device that can connect any serial device (RS232/RS485/RS422) to a Standard Ethernet network. Simple Type: Media Converter SSE232 is a RS-232/485/422 converter to the Ethernet and vice versa. It allows access, through the Ethernet, to equipment like alarm panels, data acquisitors, PLCs or any other device with a serial interface. SSE232 is the interface between the equipment with serial communication and the Ethernet network, acting as a transparent converter and also providing digital inputs/outputs that can be independently handled. The amount of digital input/outputs and the amount and type of ports supplied by SSE232 depend on each model in particular. Figure 1 shows the codification used by each model in detail. Request Quote
SSE232-040-22-IA2 EXEMYS Exemys SSE232, Serial to Ethernet Converter, 4x RS485 to 10 BaseT Ethernet, 2 Digital Input/Output Simple Type: TBD Request Quote
SSE232-1044-IA EXEMYS Exemys SSE232, Serial to Ethernet Converter, RS232 to 10 BaseT Ethetnet, 4 Digital Input/Output Simple Type: Network Appliance Request Quote
SSE232-1083 EXEMYS Exemys SSE232, Serial to Ethernet Converter, 8 Inputs, 3 Outputs Simple Type: TBD Request Quote
SSE232-1083-ST EXEMYS Exemys offers a full line of Ethernet-RS232/RS422/RS485 converters, allowing access from Ethernet TCP/IP to equipments with serial ports. Through these devices, many remote equipment, such as alarm panels, data capturers, PLC controllers and intelligent sensors, can be connected to the Internet. This transparent gateways count on multiple I/O connections, ranging from one to four serial ports in RS232/422/485 Standards, and are available as final-users, OEM or industrial automation versions. The built in I/O connections features digital control with other devices (sensors, contacts, relays, etc.). In addition, they have a wide range of electric power supply (9-26V AC or 9-30 V DC.) and an excellent price-quality ratio. This converter counts on 6 digital I/O, which can be read or activated by means of exclusive TCP/IP sockets. If the number of I/O is not sufficient, it is possible to connect (by means of a flat cable) a board of 8 inputs (open collector, opto-isolated, dry contact or TTL) and 8 outputs (8 relays from 10 to 250 VAC.) ETHERNET 10 BaseT SERIAL PORTS RS232 1 RS485 --- RS422 --- DIGITAL INPUTS 8 OUTPUTS 3 Simple Type: SERIAL SERVERS Request Quote
SSE232-114C-IA EXEMYS Exemys SSE232, Serial to Ethernet Converter, 1x RS232, 1x RS485 to 10 BaseT Ethernet Simple Type: SERIAL SERVERS Request Quote
SSE232-1C00-LE EXEMYS SSE232-LE is an Etherhet communication device that provides Ethernet connectivity to your legacy serial link (RS232/RS485/RS422). Now you can connect two devices linked with RS232/RS485/RS422 through an Ethernet network. Moreover, you can gain access to these devices from a computer. (*) Only one configurable port ETHERNET 10 BaseT SERIAL PORTS RS232 1 RS485 1 RS422 1 Simple Type: SERIAL SERVERS Request Quote
SSE232-1C43 EXEMYS Exemys SSE232, Serial to Ethernet Converter, 4 Inputs, 3 Outputs Simple Type: TBD Request Quote
SSE232-1C43-ST EXEMYS SSE232-1C43-ST (EXEMYS) - Exemys offers a full line of Ethernet-RS232/RS422/RS485 converters Simple Type: System Exemys offers a full line of Ethernet-RS232/RS422/RS485 converters, allowing access from Ethernet TCP/IP to equipments with serial ports. Through these devices, many remote equipment, such as alarm panels, data capturers, PLC controllers and intelligent sensors, can be connected to the Internet. This transparent gateways count on multiple I/O connections, ranging from one to four serial ports in RS232/422/485 Standards, and are available as final-users, OEM or industrial automation versions. The built in I/O connections features digital control with other devices (sensors, contacts, relays, etc.). In addition, they have a wide range of electric power supply (9-26V AC or 9-30 V DC.) and an excellent price-quality ratio. This converter counts on 6 digital I/O, which can be read or activated by means of exclusive TCP/IP sockets. If the number of I/O is not sufficient, it is possible to connect (by means of a flat cable) a board of 8 inputs (open collector, opto-isolated, dry contact or TTL) and 8 outputs (8 relays from 10 to 250 VAC.) ETHERNET 10 BaseT SERIAL PORTS RS232 1 RS485 1 RS422 1 DIGITAL INPUTS 4 OUTPUTS 3 Only one configurable port Request Quote
SSE232-1C4C-IA EXEMYS CONVERTER SERIAL TO ETHERNET Simple Type: TBD Request Quote
SSE232-2043 EXEMYS Exemys SSE232, Serial to Ethernet Converter, 4 Inputs, 3 Outputs Simple Type: TBD Request Quote
SSE232-2043-ST EXEMYS Exemys offers a full line of Ethernet-RS232/RS422/RS485 converters, allowing access from Ethernet TCP/IP to equipments with serial ports. Through these devices, many remote equipment, such as alarm panels, data capturers, PLC controllers and intelligent sensors, can be connected to the Internet. This transparent gateways count on multiple I/O connections, ranging from one to four serial ports in RS232/422/485 Standards, and are available as final-users, OEM or industrial automation versions. The built in I/O connections features digital control with other devices (sensors, contacts, relays, etc.). In addition, they have a wide range of electric power supply (9-26V AC or 9-30 V DC.) and an excellent price-quality ratio. This converter counts on 6 digital I/O, which can be read or activated by means of exclusive TCP/IP sockets. If the number of I/O is not sufficient, it is possible to connect (by means of a flat cable) a board of 8 inputs (open collector, opto-isolated, dry contact or TTL) and 8 outputs (8 relays from 10 to 250 VAC.) ETHERNET 10 BaseT SERIAL PORTS RS232 2 RS485 --- RS422 --- DIGITAL INPUTS 4 OUTPUTS 3 Simple Type: SERIAL SERVERS Request Quote
SSE232-2044-IA EXEMYS Exemys SSE232, Serial to Ethernet Converter, 2x RS232 to 10 BaseT Ethernet, 4 Digital Input/Output Simple Type: SERIAL SERVERS Request Quote
SSE232-2232 EXEMYS Exemys SSE232, Serial to Ethernet Converter, 3 Inputs, 3 Outputs Simple Type: TBD Request Quote
SSE232-2232-ST EXEMYS Exemys offers a full line of Ethernet-RS232/RS422/RS485 converters, allowing access from Ethernet TCP/IP to equipments with serial ports. Through these devices, many remote equipment, such as alarm panels, data capturers, PLC controllers and intelligent sensors, can be connected to the Internet. This transparent gateways count on multiple I/O connections, ranging from one to four serial ports in RS232/422/485 Standards, and are available as final-users, OEM or industrial automation versions. The built in I/O connections features digital control with other devices (sensors, contacts, relays, etc.). In addition, they have a wide range of electric power supply (9-26V AC or 9-30 V DC.) and an excellent price-quality ratio. This converter counts on 6 digital I/O, which can be read or activated by means of exclusive TCP/IP sockets. If the number of I/O is not sufficient, it is possible to connect (by means of a flat cable) a board of 8 inputs (open collector, opto-isolated, dry contact or TTL) and 8 outputs (8 relays from 10 to 250 VAC.) ETHERNET 10 BaseT SERIAL PORTS RS232 2 RS485 2 RS422 --- DIGITAL INPUTS 3 OUTPUTS 2 Simple Type: SERIAL SERVERS Request Quote
SSE232-224C-IA EXEMYS Exemys SSE232, Serial to Ethernet Converter, 2x RS232, 2x RS485, 1x RS422 to 10 BaseT Ethernet Simple Type: SERIAL SERVERS Request Quote
SSE232-3132 EXEMYS Exemys SSE232, Serial to Ethernet Converter, 3 Inputs, 3 Outputs Simple Type: TBD Request Quote
SSE232-3132-ST EXEMYS Exemys offers a full line of Ethernet-RS232/RS422/RS485 converters, allowing access from Ethernet TCP/IP to equipments with serial ports. Through these devices, many remote equipment, such as alarm panels, data capturers, PLC controllers and intelligent sensors, can be connected to the Internet. This transparent gateways count on multiple I/O connections, ranging from one to four serial ports in RS232/422/485 Standards, and are available as final-users, OEM or industrial automation versions. The built in I/O connections features digital control with other devices (sensors, contacts, relays, etc.). In addition, they have a wide range of electric power supply (9-26V AC or 9-30 V DC.) and an excellent price-quality ratio. This converter counts on 6 digital I/O, which can be read or activated by means of exclusive TCP/IP sockets. If the number of I/O is not sufficient, it is possible to connect (by means of a flat cable) a board of 8 inputs (open collector, opto-isolated, dry contact or TTL) and 8 outputs (8 relays from 10 to 250 VAC.) ETHERNET 10 BaseT SERIAL PORTS RS232 3 RS485 1 RS422 --- DIGITAL INPUTS 3 OUTPUTS 2 Simple Type: SERIAL SERVERS Request Quote
SSE232-400-00-IA2 EXEMYS Exemys SSE232, Serial to Ethernet Converter, 4x RS232 to 10 BaseT Ethernet Simple Type: TBD Request Quote
SSE232-400-00-IA2-CF EXEMYS Exemys SSE232, Serial to Ethernet Converter, 4x RS232 to 10 BaseT Ethernet Simple Type: TBD Request Quote
SSE232-4032 EXEMYS Exemys SSE232, Serial to Ethernet Converter, 3 Inputs, 3 Outputs Simple Type: TBD Request Quote
SSE232-4032-ST EXEMYS Exemys offers a full line of Ethernet-RS232/RS422/RS485 converters, allowing access from Ethernet TCP/IP to equipments with serial ports. Through these devices, many remote equipment, such as alarm panels, data capturers, PLC controllers and intelligent sensors, can be connected to the Internet. This transparent gateways count on multiple I/O connections, ranging from one to four serial ports in RS232/422/485 Standards, and are available as final-users, OEM or industrial automation versions. The built in I/O connections features digital control with other devices (sensors, contacts, relays, etc.). In addition, they have a wide range of electric power supply (9-26V AC or 9-30 V DC.) and an excellent price-quality ratio. This converter counts on 6 digital I/O, which can be read or activated by means of exclusive TCP/IP sockets. If the number of I/O is not sufficient, it is possible to connect (by means of a flat cable) a board of 8 inputs (open collector, opto-isolated, dry contact or TTL) and 8 outputs (8 relays from 10 to 250 VAC.) ETHERNET 10 BaseT SERIAL PORTS RS232 4 RS485 --- RS422 --- DIGITAL INPUTS 3 OUTPUTS 2 Simple Type: SERIAL SERVERS Request Quote