SC-200

WAVETRONIX

WAVETRONICS SC-200 SmartConnect Serial to Ethernet Converter Simple Type: Analog-to-Digital Converter The Click 201 and 202 AC to DC Power Converters provide 24 VDC at currents of 1-Amp (Click 201)or 2-Amps (Click 202). These modules offer a primary-switched mode power supply in a slim design,housed in casings that are only 22.5 or 45 mm wide. With a 100 percent power reserve, the Click 201 and 202 are the most effective remedy for static voltage dips, transient failures of supply voltage or continuous phase failures. Generously dimensioned capacitors guarantee a mains buffering of more than 20 ms under full load. Click 201 and 202 devices are approved for international use, according to standards established in the CB scheme, UL 60 950 and UL 508

Click! 403

WAVETRONIX

Wavetronix Click! 400 Series Wireless Data Converter Bluetooth, RS-485, RS-232 Simple Type: Analog-to-Digital Converter The Click! 403 Serial to Bluetooth Converter Module allows Bluetooth communication with Smart Sensors and other serial devices. The convenience of Bluetooth communication allows users to monitor sensors after installation is complete without physically connecting to the sensor or peripheral device. Like the 402, the 403 can perform RS-232 to RS-485 as well as serial to Bluetooth conversions. Download the datasheet (PDF)

Click! 401

WAVETRONIX

Wavetronix Click! 400 Series Wireless Data Converter 802.11b, RS-485, RS-232 DTE Simple Type: Analog-to-Digital Converter

click! 400

WAVETRONIX

Wavetronix click! 400 Series Wireless Data Converters Simple Type: Analog-to-Digital Converter The simple connectivity of the Click! 400 series of wireless data converters makes it easy to integrate the Wavetronix SmartSensor into existing wireless data networks. As part of the Wavetronix Click! family, the 400 series offers easy-to-use communication solutions that deliver the most accurate traffic data possible. Click! 400 series modules are DIN rail mounted and include hot-swappable connection buses and pluggable screw terminals for easy installation. The slim design allows the modules to operate as stand-alone products or in conjunction with other Click! devices, and the durable, low-power devices are designed to operate in extreme conditions. Front-panel LED indicate proper set-up and operation, and all of the modules are equipped with multiple connection ports for user convenience. The Click! 401 Serial to 802.11b Converter Module allows serial devices like the SmartSensor to communicate over 802.11b by converting either RS-232 or RS-485 communication to 802.11b communication and vice versa. The 401 device can also perform serial conversions and uses either 802.11b or serial interfaces to con?gure its communication baud rates. For modem-based communication systems, the Click! 402 GSM Modem offers remote access to SmartSensor and other compatible ITS devices. The modem complies with telephone systems world-wide and connects to all standard RS-232 devices with a maximum RS-232 rate of 115.2 kbps. The Click! 403 Serial to Bluetooth Converter Module allows Bluetooth communication with SmartSensors and other serial devices. The convenience of Bluetooth communication allows users to monitor sensors after installation is complete without physically connecting to the sensor or peripheral device. Like the 402, the 403 can perform RS-232 to RS-485 as well as serial to Bluetooth conversions. Download the datasheet (PDF)

click! 100

WAVETRONIX

Wavetronix click! 100 Analog-to-Digital Converter - contact closure devices makes it easy to integrate the Wavetronix SmartSensor into existing traffic data networks Simple Type: Analog-to-Digital Converter contact closure devices makes it easy to integrate the Wavetronix SmartSensor into existing traffic data networks. As part of the Wavetronix Click! family, the 100 series products are easy-to-use ITS solutions that collect and deliver the most accurate traffic data possible.