MTC01100-18

OETIKER

OETIKER Time Controller Simple Type: TBD

MTC01100-102

OETIKER

OETIKER Time Controller Simple Type: TBD

15500021

OETIKER

OETIKER 15500021 Ear Clamp - Stainless steel coated, 10 ear width, 31.5 – 34.6 mm size range, mechanical interlock, 0.6 mm thick clamp Simple Type: Clamp Using tools designed or endorsed by OETIKER, the clamp is closed by drawing together the lower radii of the “ear”. The maximum diameter reduction is proportional to the open “ear” width. The clamp ear should be closed with a constant tool jaw force, this practice is referred to as “force priority closure”. This assembly method ensures that a uniform and repeatable stress is applied to the application with a constant tensile force on the mechanical interlock. It is important to realize that there is in a very close relationship between the desired compression of the material being clamped and the closing force selected. Download the datasheet (PDF)

15500020

OETIKER

OETIKER 15500020 Ear Clamp - Stainless steel coated, 10 ear width, 30 – 33.1 mm size range, mechanical interlock, 0.6 mm thick clamp Simple Type: Clamp Using tools designed or endorsed by OETIKER, the clamp is closed by drawing together the lower radii of the “ear”. The maximum diameter reduction is proportional to the open “ear” width. The clamp ear should be closed with a constant tool jaw force, this practice is referred to as “force priority closure”. This assembly method ensures that a uniform and repeatable stress is applied to the application with a constant tensile force on the mechanical interlock. It is important to realize that there is in a very close relationship between the desired compression of the material being clamped and the closing force selected. Download the datasheet (PDF)

15500019

OETIKER

OETIKER 15500019 Ear Clamp - Stainless steel coated, 10 ear width, 28.5 – 31.6 mm size range, mechanical interlock, 0.6 mm thick clamp Simple Type: Clamp Using tools designed or endorsed by OETIKER, the clamp is closed by drawing together the lower radii of the “ear”. The maximum diameter reduction is proportional to the open “ear” width. The clamp ear should be closed with a constant tool jaw force, this practice is referred to as “force priority closure”. This assembly method ensures that a uniform and repeatable stress is applied to the application with a constant tensile force on the mechanical interlock. It is important to realize that there is in a very close relationship between the desired compression of the material being clamped and the closing force selected. Download the datasheet (PDF)