RGT Technology, LLC . . .

Filter by Category
Unavailable
Filter by Manufacturer
Unavailable
Part Number Manufacturer Description Brand Price & Lead Time
PMC-CAN266-1 ESD ESD PMC-CAN/266-1 I/O Controller - 1x CAN 2.0A/B, ISO11898, CAN interfaces electrically isolated and designed acc. to ISO 11898 Simple Type: I/O Controller The PMC-CAN/266 is an efficient PMC module designed for 66 MHz PMC slots with one or optional two CAN-interfaces. The PMC-CAN/266 module works in bus systems with speeds of 33 MHz or 66 MHz, and it uses a PCI bus width of 32 bits. The ISO 11898 compliant CAN interfaces allow data transfer rates up to 1 Mbit/s, allows bit rate setting by software, and is opto-isolated. In the PMC-CAN/266-RIO version, the CAN-signals (TTL-level) are alternatively routed via the PMC-connector Pn4. Software Support: Software drivers are available for Windows, Linux, and QNX. Drivers for other operating systems are available as well. Pease Note: Because this is a passive CAN module without a microcontroller on board, the performance of the host CPU can limit the maximum effective CAN bit rate value. Download the datasheet (PDF) Request Quote
PMC-CAN266-2 ESD ESD PMC-CAN/266-2 I/O Controller - 2x CAN 2.0A/B, ISO11898, Works at 66 MHz PCI and 33 MHz PCI, Software drivers available for many operating systems Simple Type: I/O Controller The PMC-CAN/266 is an efficient PMC module designed for 66 MHz PMC slots with one or optional two CAN-interfaces. The PMC-CAN/266 module works in bus systems with speeds of 33 MHz or 66 MHz, and it uses a PCI bus width of 32 bits. The ISO 11898 compliant CAN interfaces allow data transfer rates up to 1 Mbit/s, allows bit rate setting by software, and is opto-isolated. In the PMC-CAN/266-RIO version, the CAN-signals (TTL-level) are alternatively routed via the PMC-connector Pn4. Software Support: Software drivers are available for Windows, Linux, and QNX. Drivers for other operating systems are available as well. Pease Note: Because this is a passive CAN module without a microcontroller on board, the performance of the host CPU can limit the maximum effective CAN bit rate value. Download the datasheet (PDF) Request Quote
PMC-CAN266-RIO ESD ESD PMC-CAN/266-2 I/O Controller - 2x CAN 2.0A/B, signals with TTL-level via PMC-connector, Powerful PMC-CAN Interface, Bit rate up to 1 Mbit/s Simple Type: I/O Controller The PMC-CAN/266 is an efficient PMC module designed for 66 MHz PMC slots with one or optional two CAN-interfaces. The PMC-CAN/266 module works in bus systems with speeds of 33 MHz or 66 MHz, and it uses a PCI bus width of 32 bits. The ISO 11898 compliant CAN interfaces allow data transfer rates up to 1 Mbit/s, allows bit rate setting by software, and is opto-isolated. In the PMC-CAN/266-RIO version, the CAN-signals (TTL-level) are alternatively routed via the PMC-connector Pn4. Software Support: Software drivers are available for Windows, Linux, and QNX. Drivers for other operating systems are available as well. Pease Note: Because this is a passive CAN module without a microcontroller on board, the performance of the host CPU can limit the maximum effective CAN bit rate value. Download the datasheet (PDF) Request Quote
PMC-CAN331-1 ESD ESD=PMC-CAN/331-1 I/O Controller - 1x CAN, ISO 11898, CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s Simple Type: I/O Controller The module PMC-CAN/331 uses a 68331 microcontroller that cares for the local CAN-data management. The CAN data is stored in the local SRAM with guaranteed security and consistency of data to 1 Mbit/s. The fully ISO 11898 compliant CAN interfaces allow a data transfer rate of 1 Mbit/s. The CAN interfaces are electrically isolated with optocouplers and DC/DC converters. The board ships with software examples in source code for DOC and Windows 3.11. There are software drivers available for Windows, Linux, VxWorks, LynxOS, RTOS-UH and other operating systems. esd has software packages for CAL, CANopen or DeviceNet available for Windows NT, Windows 95/98 or UNIX systems. Download the datasheet (PDF) Request Quote
PMC-CAN331-1DN ESD ESD PMC-CAN/331-1DN I/O Controller - 1x DeviceNet, CAN controller SJA1000 (CAN2.0A/B), Firmware updates possible, 3.3 V signal voltage version available Simple Type: I/O Controller The module PMC-CAN/331 uses a 68331 microcontroller that cares for the local CAN-data management. The CAN data is stored in the local SRAM with guaranteed security and consistency of data to 1 Mbit/s. The fully ISO 11898 compliant CAN interfaces allow a data transfer rate of 1 Mbit/s. The CAN interfaces are electrically isolated with optocouplers and DC/DC converters. The board ships with software examples in source code for DOC and Windows 3.11. There are software drivers available for Windows, Linux, VxWorks, LynxOS, RTOS-UH and other operating systems. esd has software packages for CAL, CANopen or DeviceNet available for Windows NT, Windows 95/98 or UNIX systems. Download the datasheet (PDF) Request Quote
PMC-CAN331-2 ESD ESD PMC-CAN/331-2 I/O Controller - 2x CAN, ISO 11898, PMC module with one or two independent CAN nets, Microcontroller 68331 for local data management Simple Type: I/O Controller The module PMC-CAN/331 uses a 68331 microcontroller that cares for the local CAN-data management. The CAN data is stored in the local SRAM with guaranteed security and consistency of data to 1 Mbit/s. The fully ISO 11898 compliant CAN interfaces allow a data transfer rate of 1 Mbit/s. The CAN interfaces are electrically isolated with optocouplers and DC/DC converters. The board ships with software examples in source code for DOC and Windows 3.11. There are software drivers available for Windows, Linux, VxWorks, LynxOS, RTOS-UH and other operating systems. esd has software packages for CAL, CANopen or DeviceNet available for Windows NT, Windows 95/98 or UNIX systems. Download the datasheet (PDF) Request Quote
PMC-CAN331-2DN ESD ESD PMC-CAN/331-2DN I/O Controller - 2x DeviceNet, CAN interfaces electrically isolated, designed acc. to ISO 11898, bit rate up to 1 Mbit/s, 3.3 V signal voltage version available Simple Type: I/O Controller The module PMC-CAN/331 uses a 68331 microcontroller that cares for the local CAN-data management. The CAN data is stored in the local SRAM with guaranteed security and consistency of data to 1 Mbit/s. The fully ISO 11898 compliant CAN interfaces allow a data transfer rate of 1 Mbit/s. The CAN interfaces are electrically isolated with optocouplers and DC/DC converters. The board ships with software examples in source code for DOC and Windows 3.11. There are software drivers available for Windows, Linux, VxWorks, LynxOS, RTOS-UH and other operating systems. esd has software packages for CAL, CANopen or DeviceNet available for Windows NT, Windows 95/98 or UNIX systems. Download the datasheet (PDF) Request Quote
PMC-CAN400-4 ESD ESD PMC-CAN/400-4 I/O Controller - 4x CAN, 1x IRIG-B, ARINC 825 firmware, standard cooling, 33/66 MHz PCI interface Simple Type: I/O Controller The PMC-CAN/400-4 features four electrically isolated CAN High-Speed interfaces according to ISO 11898. A FPGA with optional integrated 32-bit microcontroller handles the local data control and management. The PMC-CAN/400-4 provides high-resolution hardware timestamps. The IRIG-B interface offers inputs for analog or RS-422 IRIG-B coded signals. Both are electrically isolated. An additional microcontroller controls IRIG-B evaluation. All I/Os connect to a 25-pin DSUB connector in the front panel. An adapter cable to 9-pin DSUB for CAN is available. A conduction-cooled version of the PMC-CAN/400-4 is available. esd offers a VMEbus carrier board in conduction cooled design to carry up to two PMC-CAN/400-4. CAN layer 2 (CAN-API) software drivers are available for Windows, VxWorks*, QNX* and Linux* supporting up to 24 CAN nets. Drivers for other operating systems are available on request. The CANopen software package is available for Windows, VxWorks* and Linux*; and, as another higher-layer protocol, esd electronics, Inc is offering ARINC 825 as an option. Download the datasheet (PDF) Request Quote
PMC-CAN400-4-CC ESD ESD PMC-CAN/400-4-CC I/O Controller - 4x CAN, 1x IRIG-B, ARINC 825 firmware, conduction cooled, interfaces available at Pn4 with TTL level only Simple Type: I/O Controller The PMC-CAN/400-4 features four electrically isolated CAN High-Speed interfaces according to ISO 11898. A FPGA with optional integrated 32-bit microcontroller handles the local data control and management. The PMC-CAN/400-4 provides high-resolution hardware timestamps. The IRIG-B interface offers inputs for analog or RS-422 IRIG-B coded signals. Both are electrically isolated. An additional microcontroller controls IRIG-B evaluation. All I/Os connect to a 25-pin DSUB connector in the front panel. An adapter cable to 9-pin DSUB for CAN is available. A conduction-cooled version of the PMC-CAN/400-4 is available. esd offers a VMEbus carrier board in conduction cooled design to carry up to two PMC-CAN/400-4. CAN layer 2 (CAN-API) software drivers are available for Windows, VxWorks*, QNX* and Linux* supporting up to 24 CAN nets. Drivers for other operating systems are available on request. The CANopen software package is available for Windows, VxWorks* and Linux*; and, as another higher-layer protocol, esd electronics, Inc is offering ARINC 825 as an option. Download the datasheet (PDF) Request Quote
PMC-CPU405 ESD ESD PMC-CPU/405 I/O Controller - PrPMC processor AMCC PPC405GPr, 400MHz 64 MB RAM, 32 MB Flash, 2x CAN interfaces, TTL-level signals via PMC-I/O connector, PIM adapter module available Simple Type: I/O Controller The PMC-CPU/405 is a PCI Mezzanine Card that automatically switches to monarch (PrPMC) or non-monarch mode according to the systems requirements. The PowerPCTM AMCC PPC405GPr with 400 MHz enables a performance of 608 MIPS. The board is equipped with 64 Mbyte SDRAM and 32 Mbyte Flash. You can support system time by RTC (with Gold Cap) or IRIG-B. For CAN bus synchronization tasks a high-resolution CAN hardware timestamp is supported. The PMC-CPU/405 comes with an Ethernet interface that is accessible as 100BaseT via a RJ45 connector at the front panel. The PMC-CPU/405 provides 2 CAN interfaces based on SJA1000 CAN controllers. The CAN signals are available as TTL only via PMC connector. External converters from CAN-TTL to CANISO11898 are available. Both CAN allow data transfer rates of 1 Mbit/s One of two RS-232 serial ports is available at the front panel via a DSUB9 connector, the other one via PMC-I/O connector. The flash memory carries the open source firmware ‘U-Boot’ enabling the PMC-CPU/405 to boot various operating systems from network and on-board Flash. The PMC-CPU/405 directly supports Linux and VxWorks with full support of on-board drivers by esd, others on request. There are also higher layer protocols available i.e. CANopen and DeviceNet. Download the datasheet (PDF) Request Quote
PMC-CPU440 ESD ESD PMC-CPU/440 I/O Controller - PrPMC processor AMCC PPC440EPx 533 MHz, 256 MB RAM, 256 MBNAND Flash, 4 MB NOR Flash, 1x RS-232 access via PMC – I/O connector Simple Type: I/O Controller The PMC-CPU/440 is a PCI Mezzanine Card that automatically switches to monarch (PrPMC) or non-monarch mode according to the system’s requirements. The PowerPC™ AMCC PPC440EPx with 533 MHz or 667 MHz enables a performance of 1334 DMIPS peak, is equipped with at least 256 Mbyte DDR2 RAM and 256 Mbyte NAND Flash, and offers system time support by RTC (with double layer capacitor) or IRIG-B. For CAN bus synchronization tasks, a high-resolution CAN hardware timestamp is supported. The PMC-CPU/440 comes with two Gigabit Ethernet interfaces that are accessible as 1000BaseT via RJ45 connectors at the front panel. The PMC-CPU/440 provides 2...4 CAN interfaces controlled by an FPGA IP-Module. The CAN signals are available as TTL only via PMC connector. External converters from CAN-TTL to CANISO11898 are available. All CAN interfaces allow data transfer rates of 1 Mbit/s. An RS-232 serial port is available via the PMC-I/O connector, too. One USB 2.0 interface (host or device) is available at the front panel. The flash memory carries the open source firmware ‘U-Boot’ that enables the PMC-CPU/440 to boot various operating systems from network or on-board Flash, directly and fully supporting Linux, VxWorks (5.5 and 6.3), OS/9 and QNX on-board drivers, as well as supporting higher layer protocols like CANopen and DeviceNet. Download the datasheet (PDF) Request Quote
PMC-DVI ESD ESD PMC-DVI I/O Controller - Graphics adapter board, DVI-I (digital video interface) connector including RGB-analog Simple Type: I/O Controller The PMC-DVI is a graphics board in ‘single’ PCI mezzanine card size with the powerful graphics controller 69030 offering display modes from 640x480 (true color) at 85 Hz up to 1600x1200 (16 bit colors) at 60 Hz. The DVI-I-interface design controls CRT-monitors by analog video signals as well as TFT-monitors by digital video signals. The board is equipped with a Mini-DSUB9-connector as PS2- interface. With an adapter, you can connect a PS2-keyboard and a PS2-mouse to this port simultaneously. Graphics drivers are available for VxWorks, RTOS/UH, Linux, QNX, Windows 98/NT2000, and other drivers upon request. Download the datasheet (PDF) Request Quote
PMC-ETH2GB-RJ45 ESD ESD PMC-ETH2/GB-RJ45 I/O Controller - PMC target module with 2x Gigabit Ethernet at RJ45, Runs with standard system driver for Ethernet interfaces Simple Type: I/O Controller The PMC-ETH2/GB-RJ45 is a PMC target board in single PCI Mezzanine Card size. It is equipped with an Intel 82546GB dual port Gigabit Ethernet controller. Interfaces conform to IEEE802.3, with 1000BaseT connection via RJ45 connectors in the front panel. The board runs with the standard system drivers of Windows NT/ 2000, Linux as well as VxWorks and QNX for ETHERNET interfaces. Download the datasheet (PDF) Request Quote