NL 50-MPI

HILSCHER

Hilscher NL 50-MPI System - Pluggable Ethernet to MPI/DP/PPI converter. Simple Type: Converter As directly mountable or as firmly attachable DIN rail mountable device the adapters netLINK- and netTAPMPI are replacing expensive CP communications processors and allow the programming, visualization and control of S7-200, S7-300 or S7-400 PLCs over Ethernet. The provided driver integrates into all well-known SIMATIC engineering tools like STEP7 or TIA portal as PG/PC programming interface. The device is setup with the engineering tool itself or with conventional web browsers over the integrated web configuration pages. The adapters are suitable for programming or changing S7-PLC control programs and serve the project engineering of HMI devices over the visualization software WinCC. By supporting the „ISO on TCP“ RFC1006 Ethernet protocol any third party or series SIMATIC type of visualization station can be coupled to the PLC. Once integrated into the office or plant network and connected to the internet also remote maintenance and logging over a router is possible since plain TCP/IP protocol access mechanisms are used. Download the datasheet (PDF)

NIC 50-RE

HILSCHER

Hilscher NIC 50-RE System - netIC Real-Time-Ethernet Simple Type: System Download the datasheet (PDF)

NB 100-RE-DN

HILSCHER

Hilscher NB 100-RE-DN System - netBRICK – the rugged-line Gateway. Simple Type: Connector netBRICK is the gateway solution for applications in harsh industrial environments and enables shifting classic cabinet installations directly into the field. Whether in outdoor, humid or hazardous areas, fully moulded, assembled with M12 connectors and IP67 compliant the rugged-line gateway resists most extreme environmental conditions. netBRICK is firmware compatible to the IP20 compliant gateway netTAP 100 and converts the most estblished Real-Time Ethernet/Ethernet, Fieldbus and serial protocols used in the automation industry. Download the datasheet (PDF)

CIF 104-SCEB-RO

HILSCHER

Hilscher CIF 104-SCEB-RO Communication Interface SERCOS Passive, connector right Simple Type: SERCOS Download the datasheet (PDF)

RIF 1788-DPS

HILSCHER

Hilscher RIF 1788-DPS System - Rockwell Interface for FlexLogix. Simple Type: Network Controller The Hilscher RIF PROFIBUS Interface is based on our company technology of the successful COM and CIF series of fieldbus interfaces. With the RIF interface you will obtain tested and trusted technology. The RIF interface board extends the successful Rockwell Automation FlexLogix product family with an interface for the PROFIBUS. The interface is suitable for use in controls, I/O modules and drive technology. Depending on requirements, either a PROFIBUS Master or Slave is available. Download the datasheet (PDF)