RGT Technology, LLC . . .

PRODUCTS-Q

Details

Part Number Qx M4KCAN6
Manufacturer EXCALIBUR SYSTEMS
Category PRODUCTS-Q
Price Request Quote
Lead Time Request Quote

Description

Excalibur Systems Qx M4KCAN6 CPU Board - Same as above with 6 independent channels Simple Type: CPU Board The M4KCAN is an intelligent serial communications interface module for the multimode, multiprotocol Excalibur 4000 family of carrier boards. The M4KCAN provides a complete solution for developing and testing CAN interfaces and performing system simulation of the CAN bus. It is a highly integrated module that performs serial communication according to the CAN protocol. Each module of the M4KCAN contains up to 6 channels each containing 256 bytes of dual-port RAM for Data Blocks and control registers. All Data Blocks and control registers are memory mapped, and may be accessed in real-time. The CAN protocol uses a multi-master (contention based) bus configuration for the transfer of “communication objects” between nodes of the network. This multi-master bus is also referred to as CSMA/CR or Carrier Sense, Multiple Access, with Collision Resolution. The M4KCAN performs all serial communication functions suchas transmission and reception of messages, message filtering, transmit search, and interrupt search with minimal interaction from the user. Download the datasheet (PDF)

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Related Products

EXCALIBUR SYSTEMS
Excalibur Systems X1DD4BA1-0.3 CPU Board - 30cm cable adapter for EXC-1553PCI/MCH-2 cards Simple Type: CPU Board
EXCALIBUR SYSTEMS
Excalibur Systems X1DD2BA1-0.3 CPU Board - 30cm cable adapter for EXC-1553PCI/MCH-1 cards Simple Type: CPU Board
EXCALIBUR SYSTEMS
Excalibur Systems Tx M4K1553PxS CPU Board - MIL-STD-1553 interface module: supports BC, RT or BM modes. (RT Validated-Single Function) Simple Type: CPU Board The M4K1553Px is an intelligent, MIL-STD-1553 interface module for the multiprotocol Excalibur 4000 family of carrier boards. The M4K1553Px provides a complete solution for developing and testing 1553 interfaces and performing system simulation of the MIL-STD-1553 bus. The module handles all standard variations of the MIL-STD-1553 protocol. Each module of the M4K1553Px contains 64K bytes of dual-port RAM for Data Blocks, Control registers, and Look-up Tables. All Data Blocks and Control registers are memory mapped, and may be accessed in real-time. The M4K1553Px module can be programmed to operate in one of three modes of operation: Remote Terminal, Bus Controller/Concurrent-RT, and Bus Monitor. In addition, the module simultaneously performs as an Internal Concurrent Monitor in Remote Terminal and Bus Controller/ConcurrentRT modes. Download the datasheet (PDF)
EXCALIBUR SYSTEMS
Excalibur Systems EXC-1553 Series Cards | MIL-STD-1553 Multifunction Modules Simple Type: MIL-STD-1553
EXCALIBUR SYSTEMS
Excalibur Systems EXC-1394PCIe-x CPU Board - IEEE 1394B interface for PCI Express compatible systems Simple Type: CPU Board The EXC-1394PCIe is an intelligent, multichannel avionics communication board for interfacing to an AS5643 or an IEEE-1394 data bus. It implements a 1394b PHY layer and can operate at 100, 200 or 400 Mbps. It provides up to three fully independent nodes, each node having three full-duplex ports associated with it, and has a universal PCI Express interface that is compatible with any PCI Express slot. The EXC-1394PCIe supports Direct Memory Access (DMA), which enables the board to access system memory for reading and writing independently of the computer’s CPU. This results in faster data transfer to and from the board, with much less CPU overhead than when not using DMA. Download the datasheet (PDF)

Specifications

Not available

Datasheet

Not available

Do you need an Qx M4KCAN6? We can help you find it at a competitive price!