RGT Technology, LLC . . .

Filter by Category
Not available
Filter by Manufacturer
Part Number Manufacturer Description Brand Price & Lead Time
TS-7250 TECHNOLOGIC SYSTEMS Technologic Systems TS-7250 CPU Board with ARM 200 MHz processor, 2 COM, 2 USB, Ethernet, 32/128 MB Flash, DIO. Simple Type: CPU Board The TS-7250is a compact full-featured Single Board Computer (SBC) based upon the Cirrus EP9302ARM9 CPU, which provides a standard set of on-board peripherals. The EP9302 features an advanced ARM920T 200 MHz processor design with MMUthat allows support for high-level Embedded Operating Systems such as Linux, Windows CE, and other. This board includes NANDflash devices, which can provide up to 128MBof fast flash memory. In comparison to TS-7200, this allows quick operating system booting and large filesystem storing at the same memory device. Besides, It can run up to 64MBof high speed SDRAM. Download the datasheet (PDF) Request Quote
TS-9300 TECHNOLOGIC SYSTEMS Technologic Systems TS-9300 Daughter Card with 'Blast' board production tool for installing customized Flash drives Simple Type: Daughter Card The 9300 boot board is mated via the PC104 connector to an Embedded PC (EPC). The EPC can then boot from the flash drive on the 9300 or from its own inherent flash drive. DIP switches 1&2 control which flash drive the system will use to boot. The 9300 has a 512 KB flash 'floppy-drive' mapped as DOS drive (A:) and a 16 MB flash 'hard-drive' mapped as DOS drive (C:). The 9300 is comp atible with the TS-2100, TS-2200 and TS-2800 EPC products and is capable or saving or restoring the: flash drive, BIOS, DOS, CMOS and RTC using binary images stored in the DiskOnChip. All programming utilities and binary images for supported products are pre-installed (includes source code for flashup utility, and example code for EPC's). Download the datasheet (PDF) Request Quote
TS-9500 TECHNOLOGIC SYSTEMS Technologic Systems TS-9500 VGA/Keyboard Adapter with Compact Flash Card Simple Type: Adapter The Technologic Systems TS-9500 is a valuable tool when developing for any Technologic Systems Single Board Computer (SBC). It features a Compact Flash interface, standard VGA video connector, and standard connectors for a PS/2 Keyboard and Mouse. The TS-9500 daughter board allows for a developer to write source code, compile, run, and debug right on the target SBC using a typical PC compatible development suite (such as Borland's Turbo C). By simply moving your development tools onto the Compact Flash card, and plugging in monitor and keyboard, one can develop and debug directly on the target platform. Request Quote
TS-9600 TECHNOLOGIC SYSTEMS Technologic Systems TS-9600 Interface board with IDE interface, standard 40 pin and 50 pin laptop connectors available Simple Type: Interface Board The TS-9600 is a PC compatible IDE interface board that mates via the PC104 connector to a Single Board Computer (SBC). The DIP switch controls the IDE address and IRQ used. All versions of DOS we have tested don't require interrupts. Our TS-Linux 3.0 kernel does require an interrupt. The TS-9600 IDE interface is usually mapped as DOS drive C: or '/dev/hda' in Linux and can be mapped as DOS drive D: or '/dev/hdc' in Linux using Dip Switch 4. The TS-9600 supports Master and Slave hard drives using the same cable. Download the datasheet (PDF) Request Quote
TS-9700 TECHNOLOGIC SYSTEMS Technologic Systems TS-9700 Accessory with 12-bit A/D with 0.2% accurate Vref, 12-bit DAC optional Simple Type: Accessory The Technologic Systems TS-9700 is a PC/104 daughter board that provides 8 channels of 12-bit Analog-to-Digital (A/D) conversion using a precision 0.2% analog reference. A single Analog Devices AD7888 chip implements the heart of the A/D subsystem. Each analog input can be individually jumper selected for one of three ranges: 0 – 2.5 Volt 0 – 10.0 Volt 0 – 20 mA The Analog-to-Digital conversion takes 9 microseconds to complete allowing up to 100K samples per second. The TS-9700 can optionally be populated with 4 channels of 12-bit digital-to-analog conversion using a 0.2% analog reference. Two Texas Instruments TLV5818 chips are used to implement the four Digital-to-Analog converter (DAC) outputs. Each DAC output has a rail-to-rail output buffer that allows a nominal 0 to 5 Volt output swing using a single 5V power supply. Request Quote
TS-DIO24 TECHNOLOGIC SYSTEMS Technologic Systems TS-DIO24 Expansion Module with 24 Digital I/O with high current drive on 8 channels Simple Type: Expansion Module The TS-DIO24 is an 8-bit PC/104 expansion board that provides 24 digital I/O points. The I/O connector is an Opto-22 compatible interface that provides 16 I/O points configurable as input or output (24 mA as outputs) as well as 4 dedicated outputs capable of driving 48 mA and 4 dedicated outputs capable of sinking 1 Amp. The PC/104 interface decodes as registers in I/O space, the address is jumper selectable. Download the datasheet (PDF) Request Quote
TS-ENC100 TECHNOLOGIC SYSTEMS Technologic Systems TS-ENC100 Metal enclosure with power converter for TS-3300, TS-5300 Simple Type: Chassis / Enclosure Request Quote
TS-ENC200 TECHNOLOGIC SYSTEMS Technologic Systems TS-ENC200 Metal enclosure with power converter for TS-3300, TS-5300 Simple Type: Chassis / Enclosure Request Quote
TS-ENC530 TECHNOLOGIC SYSTEMS Technologic Systems TS-ENC530 Metal enclosure with power converter for TS-3300, TS-5300 Simple Type: Chassis / Enclosure This rugged metal enclosure is made to house Technologic Systems Single Board Computers in the most hostiles environments, protecting the internal electronics and increasing the general system reliability. In addition, it makes board utilization easier by bringing out a regulated power supply and computer's I/O interfaces through standard connectors. The TS-ENC530 metal enclosure is made to house the TS-5300 Single Board Computer and two PC/104 peripheral boards. The switching power regulator efficiently converts 12-38 VDC input into regulated +5 VDC required by the CPU Board. Request Quote
TS-ENC540 TECHNOLOGIC SYSTEMS Technologic Systems TS-ENC540 Metal enclosure with power converter for TS-5400 Simple Type: Chassis / Enclosure This rugged metal enclosure is made to house Technologic Systems Single Board Computers in the most hostiles environments, protecting the internal electronics and increasing the general system reliability. In addition, it makes board utilization easier by bringing out a regulated power supply and computer's I/O interfaces through standard connectors. The TS-ENC540 metal enclosure is made to house the TS-5400 Single Board Computer and two PC/104 peripheral boards. The switching power regulator efficiently converts 12-38 VDC input into regulated +5 VDC required by the SBC. Request Quote
TS-ENC550 TECHNOLOGIC SYSTEMS Technologic Systems TS-ENC550 Metal enclosure with power converter for TS-5500 Simple Type: Chassis / Enclosure This rugged metal enclosure is made to house Technologic Systems Single Board Computers in the most hostiles environments, protecting the internal electronics and increasing the general system reliability. In addition, it makes board utilization easier by bringing out a regulated power supply and computer's I/O interfaces through standard connectors. The TS-ENC550 metal enclosure is made to house the TS-5500 Single Board Computer and two PC/104 peripheral boards. The switching power regulator efficiently converts 12-38 VDC input into regulated +5 VDC required by the CPU Board. Request Quote
TS-ENC560 TECHNOLOGIC SYSTEMS Technologic Systems TS-ENC560 Metal enclosure with power converter for TS-5600, TS-5700 Simple Type: Chassis / Enclosure This rugged metal enclosure is made to house Technologic Systems Single Board Computers in the most hostiles environments, protecting the internal electronics and increasing the general system reliability. In addition, it makes board utilization easier by bringing out a regulated power supply and computer's I/O interfaces through standard connectors. The TS-ENC560 metal enclosure is made to house the TS-5600 Single Board Computer and two PC/104 peripheral boards. The switching power regulator efficiently converts 12-38 VDC input into regulated +5 VDC required by the CPU Board. Request Quote